INSTALLATION INSTRUCTIONS Ceiling Tile Storage Kit Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description CMS490
CMS490 Installation Instructions DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions CMS490 DIMENSIONS 34.9 1.38 22.4 0.88 88.9 3.50 34.9 1.38 88.9 3.50 0.
CMS490 Installation Instructions TOOLS REQUIRED FOR INSTALLATION 1/4" (concrete) 5/32" (wood) PARTS BAG F BAG P F (4) 06-32 x 1/2" P (2) 10-32 BAG C BAG A C (2) 10-24 x 1/2" A (2) [Track clip - left] BAG B BAG G BAG D D (4) 10-24 x 1/2" G (2) 08-32 x 1/4" BAG H BAG E B (2) [Track clip - right] E (2) 10-32 x 3/8" H (5) 08-32 x 1" K (1) CMS490 Securement Kit KB (4) [Cable support] KA (4) 1/16" x 25’ [Wire cable] L (1) [CMS490] KC (4) 1/4" x 2" KD (4) 0.
Installation Instructions CMS490 PREPARING FOR INSTALLATION Installation Requirements The CMS490 has been designed to be mounted recessed into a suspended ceiling consisting of 2’ x 2’ ceiling tiles and secured by a WireVice system. Ceiling Framework Preparing Framework 1. Attach track clips [2 left (A), 2 right (B)] one at each corner of the CMS490 frame (N) using one 06-32 x 1/2" Phillips flat head screw (F) on each clip.
CMS490 Installation Instructions Securing CMS490 Frame to Ceiling Structure 1. Examine ceiling structure (concrete, steel truss, or wood) above CMS490 frame (N) to identify four support cable anchor locations. Each location should be approximately 15° outside of support holes in CMS490 frame (N). Mark locations with pencil. (See Figure 4). (KC) x4 1 1 15° x4 3 2 1/4" 15° x4 4 (KA) x 4 Figure 5 (N) 2. Tap anchor (KC) into each hole to a depth of at least 1".
Installation Instructions CMS490 Wood Ceiling Structure 1. Installing Cable to CMS490 Frame WARNING: Anchors must be installed into wood with a CAUTION: Failure to properly tension cables (KA) may minimum thickness of 1-1/2" (38.1 mm) or greater. result in damage to ceiling tile framework. Drill a 5/32" diameter x 1-1/2" deep pilot hole at each marked cable anchor support location. Ensure hole is at least 5/8" from nearest wood edge. Remove debris from hole. (See Figure 7) 1.
CMS490 Installation Instructions Placing CMS490 Into Ceiling Structure 1. 2. 3. 4. 5. Orient CMS490 so that the electrical opening lines up with the outlet box attachment plate (J) on the CMS490 frame. (See Figure 10) Lift CMS490 (L) into place through the CMS490 frame (N). (See Figure 10) Lower onto CMS490 frame, carefully lining up outlet box attached to CMS490 frame with opening in CMS490.
Installation Instructions CMS490 WARNING: IMPROPER INSTALLATION CAN LEAD TO KIT FALLING CAUSING SEVERE PERSONAL INJURY OR DAMAGE TO EQUIPMENT! It is the installers responsibility to make certain the structure to which the kit is being mounted is capable of supporting five times the weight of the kit and all attached equipment. Reinforce the structure as required before installing the kit.
CMS490 Installation Instructions WARNING: RISK OF ELECTROCUTION! All electrical wiring required for installation should be installed by a qualified electrician. IMPORTANT ! : The appropriate outlet being installed must be the grounding type and properly grounded in accordance with all local codes and ordinances. 3. Wire outlet into junction box in accordance with all local codes and ordinances. Adding Components 1. Open and lower door on CMS490. 2.
Installation Instructions CMS490 11
CMS490 Installation Instructions USA/International Europe Chief Manufacturing, a products division of Milestone AV Technologies 8800-002117 Rev00 2011 Milestone AV Technologies, a Duchossois Group Company www.chiefmfg.com 11/11 Asia Pacific A P F A P F A 8401 Eagle Creek Parkway, Savage, MN 55378 800.582.6480 / 952.894.6280 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.
