Specifications

INSTALLATION INSTRUCTIONS

CHIEF MANUFACTURING INC.

1-800-582-6480 952-894-6280 FAX 952-894-6918

8401 EAGLE CREEK PARKWAY, STE 700

SAVAGE, MINNESOTA 55378 USA

8803-000073 Rev A

2006 Chief Manufacturing

www.chiefmfg.com

02/06

BEFORE YOU BEGIN

1-1/2" to 1" NPT Adapter Accessory

Model: CMA-151

Specifications:

• Adapts a 1-1/2" NPT threaded fitting to a 1" NPT

threaded column.

• Intended for use with Chief CMA Series

accessories and RPA Series mounts.

NOTE: U.L. listed assemblies require the use of U.L.

listed components.

• Weight capacity of 250 lbs (113 kg).

WARNING: It is the installer’s responsibility to make sure all components are properly assembled and installed

using the instructions provided. Failure to read, thoroughly understand, and follow all instructions can result in

serious personal injury, damage to equipment, or voiding of factory warranty.

• If you have any questions about this these instructions or your specific installation, contact Chief Manufacturing

at 1-800-582-6480 or 952-894-6280.

PAGE 1
INSTALLATION INSTRUCTIONS 1-1/2" to 1" NPT Adapter Accessory Model: CMA-151 Specifications: • • Adapts a 1-1/2" NPT threaded fitting to a 1" NPT threaded column. Intended for use with Chief CMA Series accessories and RPA Series mounts. NOTE: U.L. listed assemblies require the use of U.L. listed components. • Weight capacity of 250 lbs (113 kg). BEFORE YOU BEGIN WARNING: It is the installer’s responsibility to make sure all components are properly assembled and installed using the instructions provided.
PAGE 2
Model: CMA-151 Installation Instructions IMPORTANT WARNINGS AND CAUTIONS! WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corresponding instructions.