Datasheet

Installation Instructions LTAPU

Figure 6

Figure 7

Attaching Screen to Wall Mount

1. Push upright brackets tabs all the way down so that the

lower mounting slot is blocked. (See Figure 8)

2. Hang the top hook of upright brackets onto the top bar of the

mount. The bottom of the screen will be away from the wall.

3. Route cables between wall and bars.

CAUTION: PINCH POINTS! Keep fingers, hands and

cables out of pinch point areas.

Figure 8

4. Move screen towards the wall by pulling display bottom

away from wall and pushing the upright brackets tabs up

one notch to the detent which you will be able to feel

(approximately half way up). (See Figure 8)

5. Push bottom of display toward the wall bracket so that lower

latch on upright brackets surrounds lower bar of wall mount.

6. Raise upright brackets tabs all the way to secure the

brackets onto the wall mount. (See Figure 8)

Locking Mount (Optional)

Add padlock (not included) to interface bracket tab to lock the

LTAP mount. (See Figure 9)

Figure 9

(F2) x 8

Center of

Upright

(F1) x 8

(D)

(B)

(C)

(D)

(F2)

(F1)

Latch

open

Latch

closed

Upright bracket tab

Mounting Slot

Blocked

Add padlock

(Optional)