Quick Installation Guide W704D0-A4 Wireless Link USB dongle 802.11b/g/n (150 Mbps) Version 1.
Installing wireless link USB dongle driver This Quick Installation Guide provides you with some basic instructions only. The following instructions will guide you through overall installation procedure. In OS-specific situations, you should follow the on-screen instructions to proceed. Follow these steps below to install the wireless dongle driver. Step 1: Close all Windows programs that are running. Step 2: Insert the dongle into a USB port of your computer, first.
Step 4: On the window, select Yes , I want to restart my computer now . Then, click Finish. Step 5: On the Window , Please click Realtek USB Wireless LA.. Step 6: Select you will link AP name . Then, click .
Step 7: Click ok Step 8: You may see a AP link status .
For FCC Statement IMPORTANT NOTE: Federal Communication Commission (FCC) Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C. This equipment should be installed and operated with minimum distance 0.5cm between the radiator & your body.
