Instructions / Assembly

Measure the width of your window
Features:
• Light blocking ability.
• Resists moisture and humidity.
• Easy to attach with single adhesive strip.
• No holes to drill, no nails or screws.
• Easy to remove, wood remains like new.
• Easy to adjust to any narrower width:
(36" width adjusts from 18"-36")
(48" width adjusts from 30"-48")
Trim the width of your temporary shade with
just a utility knife.
1) Trim should equal on both side of the shade.
2) 36” width can adjust from 18” - 36”.
3) 48” width can adjust from 30“ - 48”.
Fold or unfold the shade to your desired
height, crimp pleats together, and secure
each side easily with the clip.
For Inside Mount,
We recommend
you subtract 1/4”
for a proper fit.
Trim Your Shade
Adjust the height easily
1
2
4
You can adhere the shade to the top of window casing
(inside mount) or directly to the wall (outside mount).
Note: the peel and stick tape may damage varnished or
lacquered surfaces. Please test on a small area to be safe.
Peel off the adhesive backing
to mount the shade
Contact us for any help!
3
INSTALLATION INSTRUCTIONS
TEMPORARY PAPER SHADE
INSIDE
MOUNT
OUTSIDE
MOUNT
Email [e-mail]
Phone 866 - 999 - 6188
Open 5am - 5pm PST