Installation Guide

ManualsBrandsChicology ManualsBlindsSlate Adjustable Sliding Panel Track Blind with 23 in. Slats up to 86 in. W x 96 in. L

1

2

3

1

Connect the Mounting Brackets

with Wall Mount "L" Brackets

W

ALL MOUNT

Using the

"L" Bracket

Connector Screws

,

connect the

Mounting

Brackets

with the

Wall

Mount "L" Brackets

and

fasten them togethe

r.

Position the

Head Rail

to the

Brackets

.

Turn the

Mounting Bracket

wings into the

Head

Rail

grooves to securely mount the

Head Rail

onto the

brackets

.

Note: Position each

Mounting Bracket

4 inches

fr

om the left and right edges of the track. Position

the

3rd and/or 4th Mounting Bracket

to the

appr

oximate middle position of the track.

Drill the

Wall Bracket Screws

to the marked places on

the wall.

Note: Do not

screw

to the

end. Leave 1/8 in. gap to

hold the

bracket

.

Use anchors if needed

Take the

Head Rail

with the

Wall Mount "L" Brackets

installed. Insert the

Wall Mount "L" Brackets

to the

Wall

Bracket Screws

to mount the

Head Rail

.

Be sure to press down to lock the

"L" Brackets

with the

Wall Bracket Screws

.

Turn

Push Firmly

3

Make the Wall Mount "L"

Bracket drill marks

2

Attach the Mounting Brackets

to the tracks

6

Attach the Panels

Attach

fabric panels

to the

pre-installed guide rails of the track

using durable Velcro. Starting with the

end guide rail is recommended.

4

Setup the Wall Mount "L"

Brackets with screws

Place the

Head Rail

to the

desired location on the wall.

Mark drill holes of where the

Wall Mount "L" Brackets

should be installed.

Brackets

must be positioned at precisely

the same height. Use a steel

tape measure and a level to

ensure accuracy.

Insert

bracket

Press

down

Lock In

5

Mount the Head

Rail to the wall

1/8in

Gap

Attach

Attach

Page 3

4in

4in

J

E

B

C

D

F

G