Installation Guide

ManualsBrandsChicology ManualsBlindsSlate Adjustable Sliding Panel Track Blind with 23 in. Slats up to 86 in. W x 96 in. L

Check the Hardware

Prepare Tools

SLIDING PANEL

I N S TRU C T I O N

Check package for the complete set of parts.

Adjust the Quad-Rail Track to the approximate width

Note: Do not over extend the track and cause it to separate completely.

CHICOLOGY

PREPARATION

Adjustable Quad-Rail Track x 1

Wall Mount "L" Bracket x 4 (for wall mount)

"L" Bracket Connector Screw x 4

Mounting Bracket x 4

Nut x 4

Wall/Ceiling Bracket Anchors x 4

Wall/Ceiling Bracket Screw x 4

Wand x 2

Strip of Strong Double-sided Adhesive x 2

Fabric Panel x 4

Strip of Valance fabric x 1

Prepare Track

Congratulations on your pu

rchase!

Sliding Panel was designed to bring the

beauty

, style, and function of fabric sliding panels to the

homes of today's customers. Th

rough an innovative

Adjustable Quad-Rail

rack and a limited yet still very

versatile line of P

emium fabric choices, we we

re able to

deliver the maximum value without sacrificing any qualit

Sliding Panels a

re great for covering large windows, such

as patio doors, as

oom dividers, closet doors, and mo

re.

Depending on the fabric you chose, you can enjoy a gentle

shade in a natural setting, c

reate a gorgeous fabric facade,

block out the light, or p

revent harmful UV rays from

entering your home.

Should you have any questions about your pu

rchase,

whether installing or caring for your p

roduct, please don't

hesitate to contact us.

We would be glad to help!

Page 1

Chicology

Summary of content (4 pages)

PAGE 1
CHICOLOGY SLIDING PANEL I N S T R U C T I O N PREPARATION 1 Check the Hardware A Check package for the complete set of parts.
PAGE 2
CEILING MOUNT 1 3 Measuring Mark where the Mounting Brackets should be installed. 2 Mounting Brackets should be positioned 4 inches from the left and right edges of the track. The 3rd and/or 4th Mounting Bracket should be positioned in the approximate middle position of the track. Brackets must be positioned at precisely the same height. Use a steel tape measure and a level to ensure accuracy. Make sure mounting surface is level.
PAGE 3
WALL MOUNT 1 3 Connect the Mounting Brackets with Wall Mount "L" Brackets Using the "L" Bracket Connector Screws, connect the Mounting Brackets with the Wall Mount "L" Brackets and fasten them together. E B D C 2 Attach the Mounting Brackets to the tracks Position the Head Rail to the Brackets. Turn the Mounting Bracket wings into the Head Rail grooves to securely mount the Head Rail onto the brackets. Note: Position each Mounting Bracket 4 inches from the left and right edges of the track.
PAGE 4
WALL MOUNT 7 Insert the Wand Quick How-to-use Guide Attach the 2 wands to the leading and ending guide rails. Hook H 45 degrees is the best angle to pull your panels 8 Attach the optional Valance Cut-out 6 individual strips of double-sided adhesive. Peel off the protective film from the front of the double-sided adhesives. Place 4 strip horizontally on the head-rail and 1 strip each on the side-rail. Firmly press the valance onto the Head Rail on all exposed adhesive parts.