Specifications

Page 2
SKU 95912
For technical questions, please call 1-800-444-3353.
REV 07h, 09c
SPECIFICATIONS
Electrical Requirements
12 VDC Power Input
1.1 HP / Permanent Magnet
6’Length Battery Wires (Qty. 2)
Maximum Line Pull Capacity 3,000 Pounds
Remote Control Hand Held Wireless (A = “Power In” / B = “Power Out”)
Gear Ratio 153.1
Cable Assembly 32 Ft. x 3/16” Diameter / High Carbon Steel, Zinc Plated
Hook Assembly
Spring Loaded Safety Latch
1” Jaw Opening
3-1/2” Long x 2-1/2” Wide x 1/2” Thick
Mounting Plate Dimensions 7.086” Long x 4.881” Wide x 2.165” High
Overall Dimensions 12.204” Long x 7.086” Wide x 6.299” High
Weight 18.9 Pounds
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside of the
front cover. Write the product’s serial number in the back of the manual near the assembly
diagram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit. 1. Cluttered benches and dark areas invite
accidents.