Spec Sheet
Single Stage Electric Contractor Series
Model Part Number HP Amps
Electrics
Voltage/Phase
cfm
displ.
cfm @
100 psi
Tank
gal.
Weight
(lbs.)
L
(in.)
W
(in.)
H
(in.)
RCP-1530 8090250831 1.5 14 115 / 1 8.5 5.4 2 x 4 130 46 23 26
RCP-2030 8090250849 2 19 / 9.5 115 / 230 / 1 8.7 6.5 2 x 4 130 46 23 26
Standard Features:
• Start/stop pressure switch control
• Fully enclosed belt guard
• Tank drains and safety valves on each tank
RCP-2030
Two Stage Gasoline Drive
Model Part Number HP Engine
Electric and
Recoil Start
cfm
displ.
cfm @
100 psi
Tank
gal.
Weight
(lbs.)
L
(in.)
W
(in.)
H
(in.)
RCP-930G 8090250631 9 Robin Standard 19.1 16.0 30H 328 45 19 38
RCP-1030G 8090250606 10 Intek Standard 19.1 16.0 30H 328 45 19 38
RCP-1130G 8090250607 11 Honda Standard 22.4 18.5 30H 358 45 19 45
RCP-1230GK 8090250823 14 Kohler Standard 22.4 18.5 30H 369 45 19 45
RCP-1230G 8090250608 14 Kohler Standard 32.5 25.3 30H 369 45 19 45
RCP-1330G 8090250609 13 Honda Standard 32.5 25.3 30H 378 45 19 45
RCP-1330G
Standard Features:
• 12 Volt electric start and recoil start
• 12 Volt alternator (Honda and Kohler Models)
• Start key / panel
• Oil monitor
• Engine slowdown (pilot valve)
• Fully enclosed belt guard
• EZ pull tank drain
• ASME tank and safety valves
• 3/4" tank discharge valve
Single Stage Gasoline Drive Contractor Series
Model Part Number HP Engine Starter
cfm
displ.
cfm @
100 psi
Tank
gal.
Weight
(lbs.)
L
(in.)
W
(in.)
H
(in.)
RCP-5530 8090250856 5.5 Honda Recoil 18.4 12.4 2 x 4 221 46 23 26
RCP-6030 8090250864 6 Robin Recoil 18.4 12.4 2 x 4 221 46 23 26
Two Stage Gasoline Drive Contractor Series
Model Part Number HP Engine Starter
cfm
displ.
cfm @
100 psi
Tank
gal.
Weight (lbs.)
L
(in.)
W
(in.)
H
(in.)
RCP-908R 8090250872 9 Robin Recoil 22.4 18.6 2 x 5 316 50 29 37
RCP-908H 8090250880 9 Honda Recoil 22.4 18.6 2 x 5 316 50 29 37
RCP-128-I 8090250898 14 Kohler Elec & Recoil 22.4 25.3 2 x 5 345 50 29 37
Standard Features:
• Engine slowdown (pilot valve)
• Engine oil protection
• Fully enclosed belt guard tank drains and discharge valve
• ASME safety valves on tank and pump
RCP-908H
RCP-7581VQP
Model RCP-581VQP RCP-583VQP RCP-7581VQP RCP-7583VQP
HP 5 5 7.5 7.5
acfm @ 100 psig 18.5 18.5 25.3 25.3
acfm @ 175 psig 16.6 16.6 22.3 22.3
Max Pressure 175 175 175 175
Voltage/Phase 208-230 / 1 208-230 / 3 208-230 / 1 208-230 / 3
Sound Level (dBa) 66 66 69 69
Shipping Weight (lbs.) 527 513 549 537
L x W x H (in.) 38.2 x 24.3 x 80 38.2 x 24.3 x 80 38.2 x 24.3 x 80 38.2 x 24.3 x 80
Standard Features:
• Low sound enclosure
• Low oil level protection
• Automatic tank drain
• Magnetic starter
• Cast iron cylinder
• 80 gallon vertical ASME/CRN tank
• 100% factory tested at full pressure
• High temperature shut down
Skid weights may vary. Additional charge for lift gate truck is required. Skid weights may vary. Additional charge for lift gate truck is required.