User's Manual

Ver a Tsai
11/ 10/ 2005 2: 07 PM
The copy is according to the product information provided by engineers
.
DATE PRODUCT CONTENT ART DESIGNER
TOTAL
PAGE VERSION
Nov. 2,
2005
Wireless Optical
Mice/ Wireless
Mice
User’s Guide
(Neutral) Amanda 11 001
4
- If you are running Windows 98 and plug the connector into the
computer, you may find a pop-up window that requires to insert
the Windows 98 CD-ROM. Please follow the window
instruction to install the required driver or set the driver path as
"Windows\system" or the other path that the driver located.
- Please link the devices within the effective distance.
- The linkage period is 15 seconds. Once press the receiver’s
Link Button, please complete the mouse linkage process within
the linage period.
- There may be a power switch located at the back of mice for
some models. Please select “On” before linking the mouse
with the receiver.
z Install Receiver
1) PS/2 Version: Please turn off the computer. Plug the PS/2
connector of the receiver to the computer.
2) USB Version: You may turn on the computer. Plug the USB
connector of the receiver to the computer.
3) USB to PS/2 Version: Turn off the computer. Plug the adapter
of the USB to PS/2 to the receiver USB connector and then
connect to the computer.
z Select Mouse Channel
Note:
- Please skip this section if the mouse is the one-channel
version.
The two-channel switch is located at the back of the mouse or inside
the battery case. Select Channel “1” or “2”.