User's Manual

3
Smart Link 2.4G Wireless Optical Mouse
surfaces. Please avoid using the optical mouse on any reflective, transparent,
metallic or complex-pattern surface.
Ÿ Recommendation: please do not use the mouse during charge periods.
Ÿ The LED indicator at the receiver will light while the mouse is low battery.
Please recharge or change the batteries immediately.
Ÿ Press any button to wake up the mouse while the mouse is in the sleeping
mode.
Ÿ Please avoid using the mice under the following conditions.
- Direct sunlight
- Extreme hot, cold, dusty or magnetic environment
- Near by fax machine, television, radio, mobile phone or any wireless device
- Metal surface
Ÿ Notices for wireless mice:
- Check the distance between the mouse and the receiver. (The operation
distance is 6 ~ 8 meters.)
- Place the positive and the negative of the battery in the right direction.
- Link the mouse with the receiver properly.
Ÿ If the product is malfunction, please change or recharge the batteries, or
move the receiver away from the computer and the monitor.
Trouble Shooting
Question 1: No mouse movement.
Solution: 1. Make sure the software that you are using supports a mouse.
2. Check that mouse is plugged into the relevant port at the back of
computer.
3. Ensure that mouse driver is installed into system.
Question 2: The cursor on the screen remains at one spot or moves erratically.
Solution:Check the mouse cable for any breaks or sharp twists. Examine the
cable closely where it connects to the mouse.
Question 3: The cursor movement stops at a corner and no longer responds to
the mouse movement.
Solution:1. Run the mouse driver to check which mode the mouse is operating in.
2. If the mouse is wireless, please check the battery power or re-link the
mouse.
Question 4: Mouse movement does not produce corresponding cursor movement
or there is a brief pause during movement.
Solution:1. Check the connecter and the receiver if there is any break or tangled.
2. Check the distance between the mouse and the receiver.
Question 5: Detection problems of the mouse
Solution: If your mouse is connected to the mouse port and is not detected by