User's Manual

2
Office Mini Wireless Optical Mouse
Install Hardware
- If you are running Windows 98 and plug the
connector into the computer, you may find a pop-up
window that requires to insert the Windows 98 CD-
ROM. Please follow the window instruction to install
the required driver or set the driver path as
"Windows\system" or the other path that the driver
located.
Put the batteries into the battery case
1. Place your thumbs on the top of the mouse.
2. Press slightly and push out the top case.
3. Insert the batteries and then close the top case.
Connect the Receiver to Your Computer
1. USB Connector: Plug the connector of the mini receiver into the USB port of
the computer.
Notice:
- If you are running Windows 98 and plug the
connector into the computer, you may find a pop-up
window that requires to insert the Windows 98 CD-
ROM. Please follow the window instruction to install
the required driver or set the driver path as
"Windows\system" or the other path that the driver
located.
2. USB to PS/2 Connector: Connect the USB to PS/2 connector to the mini
receiver and then plug the connector to the PS/2 port of the computer.
Link the Mouse with the Receiver
1. Turn on the computer. The LED indicator on
the receiver will light.
2. Press the ID Link Button at the bottom of
the mini receiver and the LED indicator will
blink. The receiver is ready to automatically
link with the mouse.
3. Press the ID Link Button on the back of the
mouse. The indicator will stay in light while
successfully finish the linkage.
4. The LED indicator will blink while you move
the mouse.
5. If you need to re-link the mouse or after
changing the mouse batteries, please repeat
the above linkage step 1~3.
6. If the mouse is interfered by other wireless-
mouse users nearby, please change the Link
ID by re-linkage immediately.
7. There are 256 Link IDs.
PS/2 Port
USB Port