User Manual

Contents of the Package

9 Navigator Mouse (Wireless Optical or Wired Optical)

9 Receiver for Wireless Optical Mouse

9 Two AA Batteries for Wireless Optical Mouse

9 Mouse Driver CD-ROM

9 User’s Quick Guide

9 Optional Parts for Wireless Optical Mouse

(The optional parts may be different due to various wireless optical mice.)

z AC to DC Adapter

z USB to DC Cable

Install Hardware

Notice:

- If you install a wired Navigator mouse, please skip the sections of “Install

Receiver”, “Select Mouse Channel” and “Link Mouse and Receiver”.

- If you install a wireless Navigator mouse, please skip the section “Install Wired

Mouse”.

z Install Wired Mouse

1) PS/2 Version: Please turn off the computer. Plug the PS/2 connecter of the

mouse to the computer.

2) USB Version: You may turn on the computer. Plug the USB connecter of the

mouse to the computer.

3) USB to PS/2 Version: Turn off the computer. Plug the adapter of the USB to PS/2

to the mouse USB connecter and then connect to the computer.

z Install Receiver

1) PS/2 Version: Please turn off the computer. Plug the PS/2 connecter of the

receiver to the computer.

2) USB Version: You may turn on the computer. Plug the USB connecter of the

receiver to the computer.

3) USB to PS/2 Version: Turn off the computer. Plug the adapter of the USB to PS/2

to the receiver USB connecter and then connect to the computer.

z Select Mouse Channel

1) The two-channel switch is located at the back of the mouse or inside the battery

case. Select Channel “1” or “2”.

2) Put the batteries into the battery case.