User's Manual

6
3) From the Control Panel, double click on the "System" icon.
4) Select the "Device Manager" tab.
5) Double click on the "Mouse" icon.
6) Double click on the Mouse Type icon.
7) Click on the "Driver" Tab.
8) Click on the "Update Driver" button.
9) From the "Update Device Driver Wizard" box, click the "Next" button.
10) Click on the radio button next to:
"Display a list of all the drivers in a specific location, so you can
select the driver you want."
11) Click on the "Next" button.
12) Insert the Mouse Driver Disk/CD-ROM into the drive.
13) Click on the "Have Disk" button.
14) When prompted, click the "Browse" button.
15) Double Click on the drive letter that Mouse Driver Disk resides.
16) Click the "OK" button.
17) Click the "OK" button again.
18) Under "Models", select the correct model that matches the pointing
device type and click on the "Next" button.
19) Click the "Next" button, then click on "Next" again.
20) Click on the "Finish" button.
21) Windows may request that you restart your system. Click on the
"Yes" button to restart.
2-5. Mouse Driver for PnP mouse and USB mouse.
When computer system detects your PnP mouse or USB mouse, it will
show a dialog with "New Hardware Found" displayed. Follow the steps
below to install the mouse drivers.
(1) When system shows dialog "Add New Hardware Wizard", click "Next" icon.
(2) On next screen, select "Display a list of all the drivers in a specific location, so you can select the driver
you want." then click "Next".
(3) Click "Have Disk" on next screen.
(4) Popped the dialog "Install From Disk", on Windows 95, 98, 2000, ME, NT4.0, type the drive letter that
Mouse Driver Disk resides. After the path typed, click "OK".
(5) Click "Next" on next screen.
(6) Click "Next" on next screen.
(7) Follow the instructions on the following screens.