Data Sheet

ManualsBrandsChibitronics ManualsUUV / ROV PartsUnderwater GPS Developer Kit (100m)

W-MK-17020-4 20.06.2017

WL-11001

UNDERWATER GPS

DEVELOPER KIT

DESCRIPTION

The Underwater GPS Developer Kit includes

everything you need to get started with robust

underwater positioning. The Master-D1

calculates the position of any Locator relative to

the position of the Receivers. Combined with

the integrated GPS and IMU, it will provide the

absolute GPS position of the Locator.

With a small physical footprint, the kit is easily

integrated into even the most compact

equipment. It can be used retro-fitted to your

underwater vehicle, or integrated through your

umbilical.

The Underwater GPS Developer Kit is running

an internal webserver exposing a GUI and an

API. Just power up and start exploring the

underwater world!

BENEFITS

• Extremely small footprint makes for easy

handling and operation.

• Highly robust operation in areas with

reflections (shallow water, around

installations etc.)

• Fully IP67 protected housing and

connectors.

CONTENTS

1x WL-21008 Master-D1

4x WL-21005-P010 Receiver-D1

(10m cable and Binder Series-770 connector)

1x WL-21016 Locator-D1 or

1x WL-21009 Locator-A1

(selectable cable length and connector)

1x 3 meter Ethernet cable

(Bulgin Series-6000 (IP68) to Shielded RJ45)

1x 3 meter power cable

(Bulgin Series-6000 (IP68) to open end)

1x Housing

(Pelican Case #1200)

FEATURES

• Webserver exposing a user-friendly GUI

• Software API for integration purposes

• Acoustic Position SW

• Global Position SW

• GPS (With integrated antenna. External

antenna supported)

• IMU (Compass/Orientation)

Summary of content (2 pages)

PAGE 1
WL-11001 UNDERWATER GPS DEVELOPER KIT DESCRIPTION CONTENTS The Underwater GPS Developer Kit includes everything you need to get started with robust underwater positioning. The Master-D1 calculates the position of any Locator relative to the position of the Receivers. Combined with the integrated GPS and IMU, it will provide the absolute GPS position of the Locator. 1x WL-21008 Master-D1 With a small physical footprint, the kit is easily integrated into even the most compact equipment.
PAGE 2
MECHANICAL INTERFACES Length : 270 mm Width : 246 mm Height : 124 mm Operating temperature : -10 to +60 °C ELECTRICAL Input voltage : 10-18 V Input current : 400 mA D1 Interfaces : 5x (Typically 4 Receiver-D1 and 1 Locator-D1) D1 connector : Binder Series-770 (IP67 plugged and unplugged) D1 connector: : JST BM06B-GHS-TBT A1 Interfaces : 1x A1 connector : Binder Series-770 (IP67 plugged and unplugged) Ethernet interfaces : 1x Ethernet connector : Bulgin Series-6000 (IP68 incl sealing cap)