User's Manual

ISO 9001｜ISO 14001｜OHSAS 18001
-2-
Changing CHANNEL / FREQUENCY
First, press "SET" till the display shows .
Then press UP or DOWN to select a new channel. As the channel changes, the frequency
changes accordingly, too. After the setting is made, the data will be automatically saved.
CHANNEL scanning
For an interference- free operation, a cleaner channel might be necessary if the current one
receives too much interference. Before scanning, the transmitter must be switched off.
First, press "SET" till the display shows .
Then press UP or DOWN to go to the next clean channel.
After the setting is made, the data will be automatically saved.
CHANNEL SYNCHRONIZING of the receiver and transmitter
a. Limit the distance between the receiver and transmitter within 30cm.
b. Align both infrared areas
c. To change the receiver’s channel, please press the synchronizing button of the transmitter.
The transmitter's LED will grow to imply synchronizing signal transmitted and
will appear on the receiver's LCD, which means the receiver has been
successfully synchronized.
d. To change the transmitters channel, please press the SYNC button of the receiver and
will appear on the receiver’s display, followed by
indicating data transferred.