Manual

6
Remember use only FLAT NOSED BULLETS. You must hold the rifle at an
angle so that the cartridges slide down the magazine instead of dropping in.
After all rounds have been placed into the magazine well. insert the magazine
tube into the magazine well until the magazine tube base is even and 90
degrees to the right of the butt plate.
Then rotate the magazine tube base 90 degrees to your left.
UNLOADING
Point the rifle in a safe direction with the muzzle pointing Up.
Lower the lever to the full extent.
With the muzzle pointed down. in a safe direction, withdraw the magazine
tube, then elevate the muzzle upward and allow the unfired rounds to slide out
into your hand Or a soft surface.
Visually inspect the chamber, magazine tube and magazine for any missed
rounds.
Replace the magazine tube.