User's Guide

SHARPS – USER’S MANUAL
www.chiappafirearms.com - 19 - e-mail [e-mail]
Ordinary and extraordinary maintenance
 Before any kind of maintenance verify that the gun is unloaded.
 Ordinary maintenance means all the steps the owner should follow to keep the gun in good service
before and after shooting.
 Extraordinary maintenance implies the change of broken or worn parts and disassembling the gun. In
this case only authorized personnel may service the gun for maintenance or repair.
 Also a revision, after a long period of storage, has to be considered an extraordinary maintenance. This
is why it is mandatory, after use, to clean properly the inside of the barrel and to oil it with a specific
lubricant for weapons.
 The gun dealer where you bought your weapon may suggest the best lubricant to use.
 Avoid excessive residual oil.
 Check that the mechanism of the weapon is smooth; in case you notice the mechanism of the weapon is
getting hard, or some essential parts start to rust, you should bring your weapon to competent,
authorized personnel.
 Don’t use pure silicone or lanoline.
 After long periods of inactivity of your rifle, it’s advisable to completely disassemble and inspect it or
give it to an authorized gunsmith for inspection.
 Should it be necessary to replace any worn or damaged parts, you will find below an exploded view
with a list of the part number for all components.
 If you need to order any parts, it is necessary to indicate the purchase date, the serial number, the exact
model and the caliber of your gun and the item ref. of the part you need.
 If you have any doubt about a problem with your gun, DON’T USE IT, have it inspected by an
authorized dealer or gunsmith.
 Improper use or actions may cause serious injury and/or death to yourself and/or any bystanders
during the firearm’s use. Always use your rifle with care and respect to avoid any incident or event that
may change your life and that of others.
Rear sight and front sight adjustment:
Most of our weapons are replicas of original military weapons, which were not equipped with accurate sight
systems. It is therefore necessary to carry out a few operations in order to regulate the sight devices to their
maximum performance.
Front and rear sight modification should be the last option
When you start using one of our weapons, you should make a few shooting tests in order to establish what is the
perfect ball size and the powder quantity that grant the best results. In case you have dove tail shape sights, it is
possible to correct the point of impact by moving the front and or rear sights to the right or to the left. If you have
fixed sights, alignment can be reached shaping or filing the front sight and/or the rear sight.