Instruction Manual

Instruction Manual FAS 611 Pg. 8
THE BARREL ADJUSTMENT
FAS AR611 offers the opportunity to rotate with the barrel to get correct point of the impact on target.
- Loosen the two socket head screws situated in the front part of the receiver (Fig.9)
- Rotating the barrel to the sides is possible change a direction of the hits.
- Tighten the two screws before you shoot.
DON’T PULL OUT THE BARREL FROM THE RECEIVER!
Fig.9
THE STOCK ADJUSTMENT
The Comb adjustment
- Loosen the two socket head screws situated on
the right side of the stock (Fig.10)
- Adjust the comb to the comb height you need and
re-tighten the two screws
The butt stock adjustment
- Loosen the socket head screws situated on the
back of the butt stock (Fig.11)
- Adjust the butt stock height you need and re-
tighten the screw.
Fig.10
Fig.11