Instruction Manual

Instruction Manual FAS 611 Pg. 7
AIMING AT A TARGET
This is the correct alignment: the front sight should be seen exactly in the middle
of the rear sight slit, and have the same height.
The top line of the sights should be level with the bottom of the aim. Fig.7
ADJUSTMENT OF THE TRIGGER
OPTION
SCREW
NUMBER
INSTRUCTION
SECOND STAGE WEIGHT
1
turn clockwise to increase the weight / turn
counterclockwise to reduce the weight
SECOND STAGE LENGTH
2
(± 3°) turn clockwise to reduce the length / turn
counterclockwise to increase the length
TRIGGER POSITION
3
turn counterclockwise – move the trigger, turn
clockwise and fix
FIRST STAGE WEIGHT
4
turn clockwise to increase the weight / turn
counterclockwise to reduce the weight
TRIGGER STOP
5
turn clockwise to reduce the "creep" / turn
counterclockwise to increase the "creep"
FIRST STAGE LENGTH
6
turn clockwise to reduce the length / turn
counterclockwise to increase the length
Fig.8