Instruction Manual

Instruction Manual FAS 611 Pg. 10
Disassembly for cleaning
ALWAYS KEEP THE RIFLE MUZZLE POINTED IN A SAFE DIRECTION!
The FAS AR611 air rifles are based on a modular concept, consisting from sub-assemblies shown at
Fig.13.
Fig.13
To dismantle the rifle in the mentioned subassemblies follow this procedure:
The Barrel-action disassembly
- Unscrew by hand the compressed-air AIR
CYLINDER.
- Using Allen key, loosen the two bottom
screws (Fig.14).
- Open loading lever toward the rear of the gun.
- After that you can strip the barrel-action from
the stock.
The Barrel disassembly
- loosen the two socket head screws situated in
the front part of the receiver (Fig.15).
- remove carefully out the barrel
Fig.14 Fig.15
Assembling the rifle
Same steps as for disassembly but with opposite sequence.
DURING THE ASSEMBLY MAKE SURE THAT ALL PARTS ARE TIGHTENED AND SCREWED
PROPERLY (AS IT WAS BEFORE DISASSEMBLY).