User's Manual

Instruction Manual Little & Double Badger, rev. October 2014 Pag. 9
Setting of the rear sight
The elevation is adjusted by moving the leaf up and down. There are 4 possible positions,
each defined by a click. The windage is adjusted by turning the windage knob (part #29 from
exploded view).
Mounting an optical sight
To mount an optical sight, the standard sight can be removed by loosening the nuts on the
base of the sight. This will provide a standard rail for mounting of optics.
Double Badger:
The front sight is a fixed fiber optic sight.
The rear sight is adjustable in height and windage (see Little Badger instructions).
LITTLE BADGER : STOCK ADJUSTMENT AND SPECIAL
FEATURES
By model Little badger it is possible to adjust the stock length.
1. Loosen the screw on the left side of the stock, item 101.008 (ref. 4 in the exploded
view), about 2 turns (picture 1) using a Torx screwdriver size T20
2. Unscrew the screw on the right side of the stock, item 110.010, about 3 turns (picture
2) using a Torx screwdriver size T20
1. Move the stock sideways (right and left) so that it is released and adjust length as
desired.
2. Once you have found the ideal position, tighten first screw item 110.010 and then
110.008
CAUTION: For safety reasons do not pull the stock beyond 1-2 rings of the thread
STANDARD SIGHT
windage knob
PICTURE 1
PICTURE 2
101.008
101.010