User's Manual

Instruction Manual Little & Double Badger, rev. October 2014 Pag. 10

• The stock of Little Badger integrates a cartridge holder for 12 cartridges and the

rifle is supplied with a convenient two-straps rucksack holster.

• The mouth of the barrel is threaded (except by the 9mm Flobert smoothbore

versions), with thread size ½-20 or ½-28 TPI.

Warning:

Keep muzzle pointed in safe direction and follow all safety procedures at

all times. Practice these steps with an unloaded gun or dummy ammo until you are

completely familiar and comfortable with the procedures. Use live ammo only when

you are prepared to shoot. Always use clean, dry, high quality ammunition (of the

proper caliber) that meets industry performance standards.

Little Badger:

Open the lever positioned in front of the trigger and bend the two parts of the rifle to almost

90°; insert the cartridge inside the cartridge chamber paying attention that it is the correct

caliber.

Close the breech block.

Double Badger:

Push the trigger guard completely, and bend the two parts of the rifle to almost 90°.

Push the safety lever back, so that the letter “S” is completely visible. Insert the cartridges

inside the cartridge chambers paying attention that they are the correct calibers.

SHOOTING/FIRING

Always wear eye and hearing protection when shooting.

1. Point muzzle in a safe direction.

2. Load gun as previously directed.

3. Grip the frame firmly.

4. (Disengage the safety).

5. Place index finger on trigger, take aim and fully pull the trigger rearward.