User's Manual
Table Of Contents
- Welcome!
- Home Screen
- Getting Started
- My Status
- Instant Messaging (IM)
- Mailbox
- E-mail and SMS
- Contacts
- QuickText
- Settings
- Battery Charging and Low Battery Warning
- Ogo Help
- Important Safety Information
14295 Rev. 0.9 9/3/04 60
Ogo Manual
10.6. Network
Active network: Shows the number of the active network.
Network Selection: Select Network Selection, then press Enter. From the pop-up, select Auto or
Manual, then press Enter.
Scan for networks: To scan for available networks, select Scan for networks and press Enter.
MSISDN: Shows the number that people can use to send SMS messages to your Ogo.
Messaging center: Customer Care uses this number to assist you if you have problems with your
device.
Edit SMSC number: Customer Care uses this messaging center number to assist you if you have
problems with your device.
GPRS status: Customer Care uses this indicator of GPRS connection to assist you if you have
problems with your device.
10.7. PMG (Personal Mobility Gateway)
Your Ogo is capable of Bluetooth connections. As devices for Ogo are added, information will be
added to this section for enabling Ogo’s Bluetooth functionality.
10.8. System Settings
Available RAM: Shows percentage of memory available.
File storage: Shows percentage of storage capacity available.
Contact Records: Shows percentage of storage available for contact records.
Software Info: Shows the version number of the software on your Ogo (for example, 1.0.70.2750).
Device Version: Shows the device version (for example, 1.1.69.2240).
IMSI: This is the international mobile system identity number for your Ogo.
IMEI: This is the international mobile equipment identification number for your Ogo.
Battery: Shows battery level as a percentage (for example, 56% of full charge).
10.9. Setting Ogo Volume/Vibration
You can set the volume, choose mute/un-mute, or turn on/off vibration for your Ogo from the
Volume/Vibration pop-up. You can activate the Volume/Vibration pop-up from any screen by pressing
ALT and any portion of the 8-Way Navigation key at the same time.
Note:
After the Volume pop-up appears, it remains visible for two seconds.
With the Volume/Vibration pop-up activated:
To increase or decrease the volume (with audio tone), use the inner ring of the 8-Way Navigation
key, and press up or down.
To turn vibration on or off, use the inner ring of the 8-Way Navigation key, and press left or right.
To mute your Ogo, press down on the outer ring of the 8-Way Navigation key. To un-mute, press
up.