User's Manual
The Main Menu
Message
56
You can configure up to 5 sets of connection profiles. Please consult your
operator for related information.
1. I n standby mode, press the left soft key,
Select.
2. Scroll to
Settings and press Select.
3. Scroll to
M ultimedia msgs. and press Select.
4. Scroll to
Connection settings and press Select.
5. Scroll to an empty profile and press
Select.
6. Scroll to
Edit and press Select.
7. According to the parameters supplied by your operator, configure the fol-
lowing:
•
H omepage: Enter the address of the homepage.
•
Session mode: Temporary or Permanent.
•
Connection Security: On or Off.
•
D ata bearer: GSM D ata or GPRS. If GSM Data is selected, you need to
setup
Dial-up number, D ata call type and D ata call speed. If GPRS is
selected, you need to setup
GPRS access point.
•
IP address: Enter the IP address.
•
Authentication type: Normal or Secure.
•
U sername: Enter the username.
•
Password: Enter the password.
Editing profiles
Before setting up a connection profile, please be sure to obtain the following parameters from
your operator:
H omepage:
Session mode: Temporary Permanent
Connection security: On Off
D ata bearer: GSM D ata (Dial-up number , Data call type Analogue I SD N ,
Data call speed Automatic 9600 14400)
GPRS (GPRS access point )
IP address: . . .
Authentication type: Normal Secure
U sername:
Password:
Inf ormation you need in case you have to set up a connect ion profile manually