User's Manual

The Main Menu
Ph one setup
87
1. I n standby mode, press the left soft key.
2. Scroll to
Phone setup and press Select.
3. Scroll to
Security and press Select.
4. Scroll to
Change code and press Select.
5. Scroll to
Phone code and press Select.
6. Enter the old Phone code and press
OK.
7. Enter the new Phone code and press
OK.
8. Enter the new Phone code again and press
OK.
Changing SIM lock code
1. I n standby mode, press the left soft key.
2. Scroll to
Phone setup and press Select.
3. Scroll to
Security and press Select.
4. Scroll to
Change code and press Select.
5. Scroll to
SI M lock and press Select.
6. Enter the old SIM lock code and press
OK.
7. Enter the new SIM lock code and press
OK.
8. Enter the new SI M lock code again and press
OK.
Closed user group
Closed user group is an operator dependent function. If you have subscribed
this feature, you can specify the group of people who can call you and receive
your call.
To activate closed user group:
1. I n standby mode, press the left soft key.
2. Scroll to
Phone setup and press Select.
3. Scroll to
Security and press Select.
4. Scroll to
Closed user group and press Select.
5. Scroll to one of the following and press
OK.
•
Preset: Activate the closed user group function and use preset closed user
group.
•
On: Activate the closed user group function and specify a closed user group.
You will be prompted to enter the number of the closed user group. The
number is available from your system operator.
•
Off: Deactivate the closed user group function.