User's Manual

The Main Menu
Call Met er
63
Viewing call cost
1. I n standby mode, press the left soft key.
2. Scroll to
Call meter and press Select.
3. Scroll to
Call cost and press Select.
4. Scroll to
Last call or All calls and press Select.
Clearing call cost
1. I n standby mode, press the left soft key.
2. Scroll to
Call meter and press Select.
3. Scroll to
Call cost and press Select.
4. Scroll to
Clear cost and press Select.
5. Enter your PIN2 code and press
OK.
Viewing remaining call cost credit
Call cost credit is used to limit the cost of your call. If your call cost exceeds
such credit, you will not be able to make phone calls. H owever, you can still
make emergency calls.
1. I n standby mode, press the left soft key.
2. Scroll to
Call meter and press Select.
3. Scroll to
Call cost and press Select.
4. Scroll to
Credit remaining and press Select.
Configuring call cost set tings
Before you can obtain call cost information, you need to configure call cost
settings following the steps below:
1. I n standby mode, press the left soft key.
2. Scroll to
Call meter and press Select.
3. Scroll to
Call cost and press Select.
4. Scroll to
Setting and press Select.
5. Enter your PIN2 code and press
OK.
6. Scroll to an item and press
Select to configure.
Cost limit: Enter a cost limit. This limit is also your call cost credit.
Currency: Enter the currency that will be used to calculate your call cost.
Price unit: Enter the unit of price that will be used to calculate your call cost.
You will be prompted to enter your PIN2 code when modifying call cost settings.
Not e