User's Manual Part 2

The Main Menu

WAP Service

Configuring WAP profiles

You can configure up to 5 sets of WAP settings. Each set of WAP

settings is called a WAP profile. The WAP profile may have

already been programmed on your SIM card after you subscribe

the WAP service to your system so you can access mobile Internet

immediately. Otherwise, you need to configure the settings manu-

ally. Please contact your system operator for details.

Setting up a WAP profile

1. In standby mode, press Menu.

2. Scroll to WAP service and press Select.

3. Scroll to Profiles and press Select.

4. Scroll to an empty profile and press Select.

5. Scroll to Edit and press Select.

6. According to the parameters supplied by your operator, config-

ure the following:

Homepage: Enter the address of the homepage.

Session mode: Temporary or Permanent.

Connection Security: On or Off.

Data bearer: GSM Data or GPRS.

IP address: Enter the IP address.

Authentication type: Normal or Secure.

Username: Enter the username.

Password: Enter the password.

Before setting up a WAP profile, please be sure to obtain the following parameters

from your operator:

Homepage:

Session mode: Temporary Permanent

Connection security: On Off

Data bearer: GSM Data GPRS

IP address: . . .

Authentication type: Normal Secure

Username:

Password:

Information you need in case you have to

set up a WAP profile manually