User's Manual Part 2

55
The Main Menu
Sound
• Ringing volume: Scroll to a desired ringing volume and press
OK. 5 volume levels are available.
• Ringing tone: Scroll to a desired ringing tone and press OK.
There are 30 built-in ringing tomes and 5 ringing tones you can
compose by yourself (see "Composing your ringing tones"on
page 55 for how to compose a ringing tone).
• Incoming call alert: Here you can select the ringing mode of
incoming calls. Available modes are: Off (no ringing tone),
Continue Ringing, Ring Once, Ascending, Group (the phone
rings only when calls from selected caller groups are received). If
Group is selected, you will be prompted to select a caller group.
• Vibrating: Press On to activate vibration, or Off to deactivate.
• Message Alert Tone: Select the sound that is played upon receiv-
ing a message. There are 4 tones available for selection. If Off is
selected, the message alert tone will be turned off.
• Keypad tones: Press On to activate keypad tone, or Off to deac-
tivate.
• Warning tones: Warning tone is played when phone battery is
low, or there is an error in operation. Press On to warning tone,
or Off to deactivate.
Renaming a sound profile
1. In standby mode, press Menu.
2. Scroll to Sound and press Select.
3. Press Select.
4. Scroll to the sound profile you want to rename and press OK.
5. Enter the new name and press OK.
Composing your ringing tones
With the Tone editor function, you can create your unique ringing
tone or compose a ringing tone according to your favorite songs.
You can create up to 5 ringing tones.
1. In standby mode, press Menu.
2. Scroll to Sound and press Select.
3. Scroll to Tone editor and press Select.
4. The ringing tone editor screen appears. Press an appropriate key
to insert symbols. Please see the table below for the mapping of
keys and symbols.
The Handsfree and Headset profiles can’t be renamed.
Note
Press this key... To...