User's Manual Part 2

45
The Main Menu
Call Meter
2. Scroll to Call meter and press Select.
3. Scroll to Call Cost and press Select.
4. Scroll to Clear cost and press Select.
5. Enter your PIN2 code and press OK.
Viewing remaining call cost credit
Call cost credit is used to limit the cost of your call. If your call
cost exceeds such credit, you will not be able to make phone calls.
1. In standby mode, press Menu.
2. Scroll to Call meter and press Select.
3. Scroll to Call Cost and press Select.
4. Scroll to Credit remaining and press Select.
Configuring call cost settings
Before you can obtain call cost information, you need to configure
call cost settings following the steps below:
1. In standby mode, press Menu.
2. Scroll to Call meter and press Select.
3. Scroll to Call Cost and press Select.
4. Scroll to Setting and press Select.
5. Scroll to an item and press Select to configure.
• Cost limit: Enter a cost limit. This limit is also your call cost
credit.
• Currency: Enter the currency that will be used to calculate your
call cost.
• Price unit: Enter the unit of price that will be used to calculate
your call cost.
6. When done, press OK.
Viewing GPRS related information
GPRS data
GPRS data counter
The GPRS data counter provides information about the size of
data you sent/received via GPRS.
1. In standby mode, press Menu.
2. Scroll to Call meter and press Select.
You will be prompted to enter your PIN2 code when modifying call cost settings.
Note