Technical data

64 Storage
GO3E4008A
2. Fold the seatback forward and
down.
GO3E4010A
3. Put the safety belts of the
outboard seats into the belt
guides.
4. To return the seatback to the
original position, pull out the
safety belt from the belt guides
and lift seatback up. Push
seatback firmly into place. Make
sure the safety belts are not
pinched by the latch.
The center rear safety belt may lock
when you raise the seatback. If this
happens, let the belt go back all the
way and start again.
If the safety belt still locked, try again
after pulling cushion out.
{Warning
To return the rear seat cushion, put
the rear part of the seat cushion in
its original position ensuring that
the safety belt buckle straps are
not twisted or caught under the
seat cushion, then push the front
part of the seat cushion firmly
down until it latches.