Technical data

Seats, restraints 41
To raise the seatback,
1. Lift the seatback and push to
original position.
2. Latch the seatback into place by
pushing on the top of the
seatback.
3. Pull the seatback forward again
to make sure the seatback is
properly latched.
Safety belts
Safety belts
MD033
The belts are locked during heavy
acceleration or deceleration of the
vehicle for the safety of the
occupants.
Safety belts are only designed for
use by one person at a time. They
are not suitable for people younger
than 12 years of age or smaller than
150 cm(5 ft).
Periodically check all parts of the belt
system for damage and proper
functionality.
Have damaged components
replaced. After an accident, have the
belts and triggered belt tensioners
replaced by a repairer.
Caution
If the seatback is not locked, it
could move forward in a sudden
stop or crash.
That could cause injury to the
person sitting there. Always push
and pull on the seatback to be sure
it is locked.
{Warning
Fasten safety belt before each trip.
In the event of an accident, people
not wearing safety belts endanger
their fellow occupants and
themselves.