Technical data

Vehicle care 267
Tyre Pressure Monitor
Operation
This vehicle may have a Tyre
Pressure Monitor System (TPMS).
The TPMS is designed to warn the
driver when a low tyre pressure
condition exists. TPMS sensors are
mounted onto each tyre and wheel
assembly, excluding the spare tyre
and wheel assembly. The TPMS
sensors monitor the air pressure in
the tyres and transmit the tyre
pressure readings to a receiver
located in the vehicle.
GC3E5005A
To adapt tyre pressure telltale to the
vehicle loading conditions, press the
MENU button in the turn signal lever.
Scroll the adjust wheel until reach
"Tyre load" menu. Press the
SET/CLR button. You can select the
following menus.
Each menu can be selected turn the
adjuster wheel in the turn signal
lever.
 Load 1: Lo (Comfort tyre
pressure mode)
 Load 2: Eco (Eco tyre pressure
mode)
 Load 3: Hi (GVW tyre pressure
mode)
Press the SET/CLR button a few
seconds to confirm.
Note
Tyre inflation pressure label is on
the left side door frame.
For the correct tyre pressure, refer
to the recommended pressure on
the tyre inflation pressure label.