Technical data

Vehicle care 257
Center high-mounted
stoplamp (CHMSL)
GC3D9010A
If the CHMSL is not operated, have
the checked by repairer.
License plate lamp
GC3D9011A
1. Prise the lamp out with a
screwdriver.
2. Remove bulb housing downward,
taking care not to pull on the
cable.
Rotate bulb holder
counterclockwise to disengage.
3. Remove bulb from holder and
renew bulb.
4. Insert bulb holder in bulb housing
and rotate clockwise.
5. Insert bulb housing and secure
using a screwdriver.
Exterior Lamp
Front Parking / DRL
Lamp
W/21/5W
Front Turn
Signal Lamp
WY21W
High-Beam
Headlamp
H1
Low-Beam
Headlamp
H7
Rear Turn
Signal Lamp
WY21W
Stop Lamp/Tail lamp W21/5W
Back-Up Lamp W21W
License Plate Lamp W5W