Technical data

Vehicle care 253
GC3E10004A
3. Remove the bulb from the bulb
socket and replace the bulb.
4. When fitting a new bulb, engage
the lugs in the recesses on the
reflector.
5. Reinstall the headlight assembly.
6. Connect the bulb socket
connector.
7. Place headlamp protective cover
in position and close.
Vehicles when driving abroad
When driving in countries where
traffic drives on the opposite side of
the road, adjust the headlamp to
prevent dazzling of oncoming traffic.
The adjusting screws are located
above the headlamp.
Turn the adjusting screws with the
screwdriver clockwise for half a turn.
For deactivation, turn the adjusting
screws counterclockwise for half a
turn.
Caution
Have the adjustment of the
headlights checked after
deactivation.
We recommend that you consult
your authorised repairer.
{Warning
Improper adjustment of the
headlamps can dazzle oncoming
drivers.