Technical data

222 Driving and operating
Resume stored speed
Turn the adjust wheel to RES/+. The
previously setting speed will be set.
To active, turn the adjust wheel
toward SET/- and release it.
Deactivation
To cancel the speed limit system,
press the button [.
To deactivate the speed limit system,
press the button
s.
Speed limit warning
If you drive above the set speed, the
warning indicator will flash and
warning chime will sound.
If the current speed is higher than
setting speed
If the current speed is higher than set
speed plus 3 km/h (1.9 mph) above,
indicator LIM* will flash and a
warning chime will sound.
If the current speed is equal to
setting speed, warning indicator and
chime will stop immediately.
If the current speed is higher than
setting speed plus 3 km/h (1.9 mph)
again, warning indicator LIM*
flashing.
But if your vehicle speed is once 5
km/h below than setting speed, the
warning chime will sound too.
Resume stored speed warning
When the driver press RES/+ button
while driving with previous setting
speed above, chime will sound 25
seconds later.
Object detection
systems
Ultrasonic parking assist
GC3G9002A
Parking assist makes parking easier
by measuring the distance between
the vehicle and rear obstacles, and
giving an acoustic signal in the
passenger compartment. It is the
driver, however, who maintains full
responsibility for parking.