Technical data

Driving and operating 213
Caution
If one of the circuits fail, the brake
pedal must be pressed with greater
pressure and the braking distance
may be increased. Have the brake
system checked and repaired by a
repairer immediately. We
recommend that you consult your
authorised repairer.
If the brake pedal can be pressed
further than normal, the brakes
may be in need of repair.
Consult a repairer immediately. We
recommend that you consult your
authorised repairer.
Caution
Do not drive with your foot resting
on the brake pedal. Do so will
accelerate wear of the brake
components. The brakes may also
become overheated, resulting in
longer braking distance and an
unsafe condition.
{Warning
After driving through deep water,
washing the vehicle, or using the
brakes excessively when going
down a steep hill, the brakes can
temporarily lose their stopping
power. This may be due to wet
brake components or overheating.
If your brakes temporarily lose their
stopping power because of
overheating: Shift to a lower gear
when going down hills. Do not
continuously apply the brakes.
If your brakes temporarily lose their
power because of wet brake
components, the following
procedure will help restore their
normal performance:
1. Check behind you for other
vehicles.
2. Keep a safe forward speed with
plenty of space to your rear and
sides.
3. Gently apply the brakes until
normal performance is
restored.
{Warning