Table of Contents Introduction .........................................1 In brief .................................................3 Keys, doors and windows.................17 Seats, restraints................................35 Storage..............................................59 Instruments and controls ..................71 Lighting............................................107 Infotainment system........................115 Climate controls ..............................185 Driving and operating.....
Memo
Introduction Introduction When this Owner’s Manual refers to a repairer visit, we recommend your Chevrolet Service Partner. Introduction All Chevrolet Service Partners provide first-class service at reasonable prices. Experienced mechanics trained by Chevrolet work according to specific Chevrolet instructions. Your vehicle is a designed combination of advanced technology, safety, environmental friendliness and economy.
2 Introduction Danger, Warnings and Cautions {Danger Text marked ? Danger provides information on risk of fatal injury. Disregarding this information may endanger life. {Warning Text marked ? Warning provides information on risk of accident or injury. Disregarding this information may lead to injury. Caution Text marked Caution provides information on possible damage to the vehicle. Disregarding this information may lead to vehicle damage.
In brief In brief Initial drive information 3 Seat adjustment Seat positioning Unlocking the Vehicle Radio remote control GO3E3014A Press button K. To move seat forward or backward, pull the handle and slide seat to desired position. Unlocks all doors. Hazard lamps will flash twice. Release the handle and make sure the seat is locked in place. See Radio remote control on page 18. See Seat adjustment on page 38. TDL050A See Central locking system on page 20. See Seat position on page 37.
4 In brief Seat backrests Head restraint adjustment Seat height Height adjustment GO3E3015A Pull lever, adjust inclination and release lever. Allow the seat to engage audibly. Do not lean on seat when adjusting. GO3E3016A Pumping the lever on the outside of the seat cushion until the seat cushion is adjusted to the desired position. To lower the seat cushion, push the lever down several times. To raise the seat cushion, pull the lever up several times. GO3E1003A Pull the head restraint upwards.
In brief Safety Belt Horizontal adjustment 5 Mirror Adjustment Interior mirrors GO3E3002A Pull the head restraint forwards. It is adjusted to the three positions. To move back pull the head restraint forwards. Then it is moved automatically backwards. MD033 Withdraw belt from reel, guide it untwisted across the body and engage the latch plate in the buckle. To reduce dazzle, pull the lever on the underside of the mirror housing.
6 In brief Steering Wheel Adjustment Exterior mirrors GC3N2006A Select the relevant exterior mirror by turning the control knob to left (L) or right (R). Then swivel the control to adjust the mirror. When the position is in "o", mirror is not selected. See Remote control mirrors on page 27. GC3N5001A Unlock lever, adjust steering wheel, then engage lever and ensure it is fully locked. Do not adjust steering wheel unless vehicle is stationary.
In brief 7 Instrument Panel Overview LHD GC3G1001A
8 In brief RHD GC3G1001R
In brief 1. Side air vents 2. Exterior lamp switch 3. Turn signals 4. Cruise control 5. Cluster 6. Horn, Driver’s airbag 7. Steering wheel controls 8. Wiper and washer lever 9. Central air vents 10. Infotainment system 11. Storage 12. Passenger airbag ON-OFF switch 13. Glove box 14. Passenger airbag ON-OFF light 15. Hazard warning flasher 16. Power outlet 17. Shift lever 18. Safety lock switch/HDC switch 19. Climate control system 20. ESC switch 21. Accelerator pedal 22. Brake pedal 23.
10 In brief ; : The tail lamps, number plate lamps, and instrument panel lamps are illuminated. Headlamp high/low-beam changer Hazard warning flashers 2 : The headlamps and all of the above lamps are illuminated. Press light switch #: Front fog lamp s: Rear fog lamp See Exterior lamp controls on page 107. GC3N6001A JD13A To switch from low to high beam, push lever. To switch to low beam, push lever again or pull. See Headlamp high/low-beam changer on page 108. See Flash-to-pass on page 108.
In brief Turn and lane-change signals Horn 11 Washer and Wiper Systems Windshield wiper JD14A lever up = right indicator GC3N5003A Press Y TDL033A lever down = left indicator 2: Continuous wipe, fast speed. See Turn and lane-change signals on page 110. 1: Continuous wipe, slow speed. 3: Intermittent operation. O: System off. 3: Misting function. For a single swipe when the windshield wipers are off, lightly move the lever down and release it.
12 In brief See Windshield wiper/washer on page 72. Rear window wiper/washer Washer Wiper Windshield washer TDL031A TEL021A TDL030A Pull lever. See "Windshield washer" under Windshield wiper/washer on page 72. See Washer fluid on page 246. Press the upward of switch to operate wiper continue. Press the downward of switch to operate wiper interval. To turn off the wiper set the switch in neutral. See Rear window wiper/washer on page 74. Push the lever toward the instrument panel.
In brief Climate control Heated rear window, heated exterior mirrors Demisting and defrosting the windows 13 Transmission Manual transmission GC3E8003A GC3N9007A GC3N2011A Operated by pressing the = button. See Heated mirrors on page 27. See Heated rear window on page 31. Turn the air distribution knob to DEFROST 5. See "Defrosting windshield" under Heating and ventilation system on page 185. See "Demisting windshield" under Air conditioning system on page 189.
14 In brief Automatic transmission MD174 Push the release button to shift. Arrows indicate shifts that do not require you to push the release button. GC3N9003A P (PARK): Locks the front wheels. Select P only when the vehicle is stationary and the parking brake is applied. MD172 Depress the brake pedal and push release button to shift. R (REVERSE): Select R only when the vehicle is stationary. Shifts that require you to push the release button are indicated by arrows. N (NEUTRAL): Neutral gear.
In brief Getting Started Check before starting off 15 Starting engine with the ignition switch Tyre pressure and condition. Engine oil level and fluid levels. MD173 Shift freely. All windows, mirrors, exterior lighting and number plates are free from dirt, snow and ice and are operational. Proper position of seats, safety belts and mirrors. Check brake function at low speed, particularly if the brakes are wet.
16 In brief Diesel engine: turn the key to position 2 for preheating until K goes out. Turn the key to position 3, depressing the clutch pedal and footbrake then release when engine is running Before restarting or to switch off the engine, turn key back to 0. Parking Do not park the vehicle on an easily flammable surface. The high temperature of the exhaust system could ignite the surface. Always apply parking brake without pressing release button.
Keys, doors and windows Keys, doors and windows Keys and locks 17 Key with foldaway key section Keys Replacement keys Keys and locks ..............................17 Doors .............................................23 Vehicle security .............................25 Exterior mirrors ..............................26 Interior mirrors ...............................28 Windows ........................................29 Roof ...............................................
18 Keys, doors and windows Radio remote control Handle with care, protect from moisture and high temperatures and avoid unnecessary operation.
Keys, doors and windows Radio remote control battery replacement Replace the battery as soon as the range is noticeably diminished. Batteries do not belong in household waste. They must be disposed of at an appropriate recycling collection point. Key with foldaway key section 1. Open the transmitter cover. 2. Remove the used battery. Avoid touching the circuit board to other components. 3. Install the new battery. Be sure the negative side (-) faces down toward the base. 4. Close the transmitter cover. 5.
20 Keys, doors and windows Central locking system Central locking button You can activate the central door locking system from the front door. This system allows you to lock and unlock all the doors, the tailgate and fuel filler door from the driver’s or passenger’s door, using either keyless remote (from outside) or the central locking button (from inside). The key (from outside) and driver’s door sill locking knob (from inside) allows only central door locking.
Keys, doors and windows 21 Unlocking Locking Deadlock Radio remote control Radio remote control For further protection when leaving the vehicle, you can deadlock the doors. Deadlocking electronically jams all the electric locks so that no door can be opened, even if entry is gained by breaking glass. {Warning TDL050A TDL052A Press button K. Press button Q. Unlock all doors. Lock all doors. Hazard lamps will flash twice.
22 Keys, doors and windows Disengaging the deadlock occurs when unlocking the doors in the normal way. OFF: The doors will lock immediately when pressing the power lock switch or the button Q on the radio remote control. Manual Door Locks Delayed Locking This feature will delay the actual locking of the doors and arming of the anti-theft alarm system for five seconds when the power door lock switch or radio remote control is used to lock the vehicle. It can be changed in the Vehicle Setting.
Keys, doors and windows 23 Doors Safety locks Caution Tailgate Do not pull the inside door handle while the child security door lock is set to LOCK position. To do so can damage the inside door handle. Opening {Warning Use the child security door locks whenever children are occupying the rear seats. TDL002A You can use a key or suitable screwdriver. To operate the child security door lock, turn the child locks into horizontal position.
24 Keys, doors and windows {Warning Do not drive with the tailgate open or ajar, e.g. when transporting bulky objects, since toxic exhaust gases could enter the vehicle. Note Closing The installation of certain heavy accessories onto the tailgate may affect its ability to remain open and opening performance. To close the tailgate, push it down so it latches securely. Do not press the touchpad while closing. It can cause opening again.
Keys, doors and windows Vehicle security The anti-theft alarm system is active directly. Anti-theft alarm system Activation 25 Deactivation Unlocking the vehicle by pressing button K on the radio remote control deactivates anti-theft alarm system. Alarm The alarm can be silenced by pressing any button of the radio remote control or by switching on the ignition. The anti-theft alarm system can be deactivated by pressing the button K or switching on the ignition.
26 Keys, doors and windows Automatic door unlocks All doors will be automatically unlocked when the impact is delivered to impact sensors while the ignition is ON. However, the doors may not be unlocked if mechanical problems occur with the door lock system or battery. Immobiliser The immobiliser system provides an additional theft deterrent to your vehicle in which it is installed and prevents it from being started by unauthorised persons.
Keys, doors and windows Remote control mirrors Folding mirrors 27 Heated mirrors Manual folding GC3N2006A Select the relevant exterior mirror by turning the control knob to left (L) or right (R). Then swivel the control to adjust the mirror. When the position is in "o", mirror is not selected. GC3N2011A GC3N2007A For pedestrian safety, the exterior mirrors will swing out of their normal mounting position if they are struck with sufficient force.
28 Keys, doors and windows Interior mirrors Automatic dimming rearview mirror {Warning Manual rearview mirror Your view through the mirror may lose some clarity when it is adjusted for night vision. Take special care with using your inside rearview mirror when it is adjusted for night vision. Failure to ensure a clear rear view while driving may result in a collision causing damage to your vehicle or other property, and/or personal injury.
Keys, doors and windows Windows 29 Power windows {Warning Manual windows Take care when operating the power windows. Risk of injury, particularly to children. If there are children on the rear seat, switch on the child safety system for the power windows. Keep a close watch on the windows when closing them. Ensure that nothing becomes trapped in them as they move. GO3E2009A The door windows can be opened or closed with the window winders. GC3N2009 Power windows can be operated with ignition ON.
30 Keys, doors and windows Operation You may operate the power windows when the ignition switch is ON by using the power window switches on each door panel. To open the window, press down on the switch. To close the window, lift up on the switch. Release the switch when the window reaches the desired position. {Warining Body parts outside vehicle can be struck by passing objects. Keep all parts of body inside vehicle. Children can operate and become entrapped in power windows.
Keys, doors and windows Child safety system for rear windows Heated rear window 31 Caution Do not use sharp instruments or abrasive window cleaners on your rear window. Do not scratch or damage the defroster wires when you clean or work around the rear window. GC3N2011A GC3N2010 Press switch v to deactivate rear power windows. To activate press v again. Operated by pressing the + button.
32 Keys, doors and windows Sun visors Roof The sun visors can be folded down or swivelled to the side to prevent dazzling. Sunroof The sun visors have mirror covers should be closed when driving. If the sun visors have vanity mirror lamp, the lamp will illuminate when opening the vanity mirror cover. {Warining Do not place the sun visor in such a manner that it obscures visibility of the roadway, traffic or other objects. {Warining Take care when operating the sunroof.
Keys, doors and windows Tilt Open/Close To open the sunroof with tilting, press the switch (3). To close the sunroof, press the switch (4). Auto open/close To open the sunroof automatically, press firmly and release the switch (1). To stop movement, press any of the switches once more. To close the sunroof automatically, press firmly and release the switch (2). To stop movement, press any of the switches once more.
Memo
Seats, restraints Seats, restraints 35 Head restraints Head restraints Head restraints ..............................35 Position Front seats ....................................37 Safety belts....................................41 Airbag system................................45 Child restraints ..............................51 {Warning Only drive with the head restraint set to the proper position.
36 Seats, restraints Head restraints on front seats Head restraints on rear seats Horizontal adjustment Height adjustment Height adjustment GO3E3002A GO3E3001A Pull the head restraint upwards. To move down press the catch (1) and push the head restraint downwards. Pull the head restraint forwards. It is adjusted to the three positions. To move back pull the head restraint forwards. Then it is moved automatically backwards. GO3E3003A Pull the head restraint upwards.
Seats, restraints Front seats Rear headrest non-use position Seat position {Warning Only drive with the seat correctly adjusted. 37 Sit with your buttocks as far back against the backrest as possible. Adjust the distance between the seat and the pedals so that your legs are slightly angled when you fully depress the pedals. Slide the passenger seat as far back as possible. Sit with your shoulders as far back against the backrest as possible.
38 Seats, restraints Set the seat high enough to have a clear field of vision on all sides and on all display instruments. There should be at least one hand of clearance between your head and the headlining. Your thighs should rest lightly on the seat without pressing into it. Adjust the head restraint. See Head restraints on page 35. Adjust the height of the safety belt. See "Height adjustment" under Three-point safety belts on page 43.
Seats, restraints Seat backrests Pull lever, adjust inclination and release lever. Allow the seat to engage audibly. Note Do not lean on seat when adjusting. Heated front seats Seat height GO3E3015A 39 GO3E3016A Pumping the lever on the outside of the seat cushion until the seat cushion is adjusted to the desired position. To lower the seat cushion, push the lever down several times. To raise the seat cushion, pull the lever up several times.
40 Seats, restraints {Warning If you cannot feel temperature change or pain to the skin, the seat heater may cause burns even at low temperatures. To reduce the risk of burns, people with such a condition should use care when using the seat heater, especially for long periods of time. Do not place anything on the seat that insulates against heat, such as a blanket, cushion, cover or similar item. This may cause the seat heater to overheat. An overheated seat heater may cause a burn or may damage the seat.
Seats, restraints To raise the seatback, 1. Lift the seatback and push to original position. 2. Latch the seatback into place by pushing on the top of the seatback. 3. Pull the seatback forward again to make sure the seatback is properly latched. Safety belts {Warning Safety belts Fasten safety belt before each trip. In the event of an accident, people not wearing safety belts endanger their fellow occupants and themselves. Safety belts are only designed for use by one person at a time.
42 Seats, restraints Note Make sure that the belts are not damaged by shoes or sharp-edged objects or trapped. Prevent dirt from getting into the belt retractors. Safety belt reminder >. See Safety belt reminders on page 85. Pre-tensioners work only once. If the pre-tensioners activate in a crash, the pre-tensioners and probably other new parts of the vehicle’s safety belt system will be need to be replaced. Incorrect handling (e.g.
Seats, restraints Do not make any modifications to belt tensioner components as this will invalidate the vehicle type approval. 43 Three-point safety belts Fitting {Warning Do not bleach or dye safety belts. It may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water. MD036 MD035 Withdraw belt from reel, guide it untwisted across the body and engage the latch plate in the buckle.
44 Seats, restraints Height adjustment on front seat safety belts Safety belt use during pregnancy Removing {Warning The belt must be positioned as low as possible across the pelvis to prevent pressure on the abdomen. Safety belts work for everyone, including pregnant women. MD038 GO3E3005A 1. Press button. 2. Adjust height and engage. Adjust the height so that the belt lies across the shoulder. It must not lie across the throat or upper arm. {Warning Do not adjust while driving.
Seats, restraints Airbag system Airbag system The airbag system consists of a number of individual systems. When triggered the airbags inflate within milliseconds. They also deflate so quickly that it is often unnoticeable during the collision. {Warning If handled improperly the airbag systems can be triggered in an explosive manner. The driver should sit back as far as possible while still maintaining control of the vehicle.
46 Seats, restraints When an air bag deploys, there may be a loud noise and smoke. These conditions are normal and are not dangerous but in case it may irritate skin of the passenger. If the irritation is continued, contact a doctor. {Danger Never allow children or infants and pregnant women and the old and the weak sit in the front passenger seats fitted with airbags. Furthermore, do not drive with a baby seat fitted thereon.
Seats, restraints {Warning 47 Side airbag system Optimum protection is only provided when the seat is in the proper position. See Seat position on page 37. Keep the area in which the airbag inflates clear of obstructions. Wear the seat belt properly fastened. Only then the airbag is able to protect. MD039 The forward movement of the front seat occupants is retarded, thereby considerably reducing the risk of injury to the upper body and head.
48 Seats, restraints Note Only use protective seat covers that have been approved for your vehicle. Be careful not to cover the airbags. {Warning GO3E3006A The side airbag system is triggered in the event of an accident of a certain severity. The ignition must be ON. MD041 The risk of injury to the thorax and pelvis in the event of a side-on collision is considerably reduced. {Warning Keep the area in which the airbag inflates clear of obstructions.
Seats, restraints 49 Curtain airbag system GO3E3006A GO3E3009A The curtain airbag system consists of an airbag in the roof frame on each side. This can be identified by the word AIRBAG on the roof pillars. The curtain airbag system is triggered in the event of an accident of a certain severity. The ignition must be ON. MD043 The risk of injury to the head in the event of a side impact is considerably reduced.
50 Seats, restraints {Warning Keep the area in which the airbag inflates clear of obstructions. The hooks on the handles in the roof frame are only suitable for hanging up light articles of clothing, without coat hangers. Do not keep any items in these clothes. Airbag on-off switch {Warning Front airbag system for the front passenger seat have to be deactivated if a child restraint system is to be fitted on this seat.
Seats, restraints Child restraints {Warning Child restraint systems When a child restraint system is being used, pay attention to the following usage and installation instructions and also those supplied with the child restraint system. GC3G3001A 51 Always comply with local or national regulations. In some countries, the use of child restraint systems is forbidden on certain seats.
52 Seats, restraints {Warning When using a child restraint system on the front passenger seat, the airbag systems for the front passenger seat must be deactivated; if not, the triggering of the airbags poses a risk of fatal injury to the child. This is especially the case if rearfacing child restraint systems are used on the front passenger seat. Selecting the right system The rear seats are the most convenient location to fasten a child restraint system.
Seats, restraints A child restraint system which has been subjected to stress in an accident must be replaced. Please ensure that infants and children are seated in the rear seats using child restraints. Until the children can use safety belts, please select a child restraint suitable for its age and make sure the child wears it. Please see the instructions on the relevant products for child restraints.
54 Seats, restraints Child Restraint Installation Locations Permissible options for fitting a child restraint system On front passenger seat Weight and age class activated airbag deactivated airbag On rear outboard seats On rear central seat1) X L2), U2) L3), U3) U3) X L2), U2) L3), U3) U3) X L2), U2) L3), U3) U3) X X L3), U3) X X X L3), U3) X Group 0: up to 10 kg or approx. 10 months Group 0+: up to 13 kg or approx. 2 years Group I: 9 to 18 kg or approx.
Seats, restraints See Head restraints on page 35 Note Move front seat to the foremost or adjust front seat backrest inclination as far as necessary to a vertical position to ensure that there is no interference between child restraint system on rear seats and front seat backrest . L: Suitable for particular child restraint systems of the "specific vehicle", "restricted" or "semi-universal" categories.
56 Seats, restraints Permissible options for fitting an ISOFIX child restraint system Weight class Group 0: up to 10 kg Group 0+: up to 13 kg Group I: 9 to 18 kg Size class Fixture On front passenger seat On rear outboard seats On rear central seat E ISO/R1 X IL1) X X E ISO/R1 X IL1) D ISO/R2 X IL1) X X C ISO/R3 X IL1) D ISO/R2 X IL1) X X C ISO/R3 X IL2) B ISO/F2 X IL, IUF X B1 ISO/F2X X IL, IUF X A ISO/F3 X IL, IUF X 1) Move front seat to the foremost posi
Seats, restraints ISOFIX size class and seat device A - ISO/F3: Forward-facing child restraint system for children of maximum size in the weight class 9 to 18 kg. B - ISO/F2: Forward-facing child restraint system for smaller children in the weight class 9 to 18 kg. B1 - ISO/F2X: Forward-facing child restraint system for smaller children in the weight class 9 to 18 kg. C - ISO/R3: Rear-facing child restraint system for children of maximum size in the weight class up to 18 kg.
58 Seats, restraints Isofix child restraint systems Top-tether fastening eyes Top-Tether fastening eyes are marked with the symbol I for a child seat. GO3E3011A GC3N3004A Fasten vehicle-approved ISOFIX child restraint systems to the ISOFIX mounting brackets. Specific vehicle ISOFIX child restraint system positions are marked in the table by IL. ISOFIX mounting brackets are indicated by a label on the backrest.
Storage Storage 59 Storage compartments Instrument panel storage Storage compartments ..................59 Luggage/load locations .................62 Additional Storage Features ..........66 Roof Rack System.........................68 Information on loading the vehicle.69 GO3E4014A GC3N4001A It is located in the instrument panel. To open the upper storage, slide the latch. It is located near the steering column on the bottom of the instrument panel. To open, pull the handle.
60 Storage Glovebox Cupholders GC3N4002A It is located on top of the glove box. To open, push the button. GO3E4003A To open, pull the grip. It is used for small articles, etc. To close, firmly push the storage door shut. {Warning To reduce the risk of injury in an accident or a sudden stop, always keep the storages door closed while driving. {Warning To reduce the risk of injury in an accident or a sudden stop, always keep the glovebox door closed while driving.
Storage {Warning 61 Sunglasses storage Do not place uncovered cups of hot liquid in the cup holder while the vehicle is in motion. If the hot liquid spills, you burn yourself. Such a burn to the driver could lead to loss of control of the vehicle. GO3E4005A The cup holders are located in the center console and the rear seat armrest. To use the rear seat cup holder, pull the strap in the rear seat armrest.
62 Storage Luggage/load locations Underseat storage Luggage compartment Folding the seatback after cushion flip {Warning Do not stack luggage or other cargo higher than the front seats. Do not allow passengers to sit on the folded seatbacks while the vehicle is in motion. GO3E4006A To use the front passenger seat undertray, pull up on the end of the tray and pull it toward the instrument panel. Push the tray toward the seat to return it to its original position.
Storage To fold down the rear seatbacks : Caution Folding the rear seat backrest before cushion flip, may cause damage to the rear seat. Always flip the cushion and fold the rear seat backrest. 1. Push head restraints down by pressing the catch. Note To ensure enough room for rear seat cushion operation, slide the front seat forward and adjust the front seatback upright. 63 Note Do not place anything in the floor. It can cause improperly folding or damage to the seat cushion.
64 Storage The center rear safety belt may lock when you raise the seatback. If this happens, let the belt go back all the way and start again. If the safety belt still locked, try again after pulling cushion out. {Warning GO3E4008A 2. Fold the seatback forward and down. GO3E4010A 3. Put the safety belts of the outboard seats into the belt guides. 4. To return the seatback to the original position, pull out the safety belt from the belt guides and lift seatback up. Push seatback firmly into place.
Storage Caution {Warning When returning rear seatback to the upright position, place the rear safety belt and buckles between the rear seatback and one cushion. Make sure the rear safety belt and buckles not to be pinched under the rear seat cushion. Ensure that the rear seatbacks are all the way back and locked in position before operating the vehicle with passengers in the rear seat. Make sure the safety belts are not twisted or caught in the seatback and are arranged in their proper position.
66 Storage Additional Storage Features Rear Compartment/Storage Panel Cover Rear Compartment Convenience Net You can carry small loads with your convenience net. Before installing the convenience net, read the instruction sheet carefully. GC3G4003A Install the upper elastic loops to the upper attachments, and then install the lower hooks to the lower attachments as shown. Caution GC3N4004A You can place tools or spare tyre, etc. Pull the strap and lift it.
Storage Storage Panel Cover Caution Do not place heavy objects in panel. When lift the tailgate it lifted too, keep clean panel to avoid objects fall. GO3E4024A Fold the load floor and place the hook into the shopping hook located in the side trim as shown. Note If it is located in inappropriate place may cause rattle noise and wear by contact with rear seat. GC3N4005A You can place small objects or hide items stored in the cargo area. To use the panel, hang each loop to both anchors of the tailgate.
68 Storage Roof Rack System Roof rack Caution {Warning Ensure that the load is evenly distributed over the side or cross rails. The roof surface must not be loaded. If you try to carry something on top of your vehicle that is longer or wider than the roof rack, the wind can catch it as you drive along. This can cause you to lose control. What you are carrying could be violently torn off, and this could cause you or other drivers to have a collision, and of course damage your vehicle.
Storage {Warning The maximum load for the roof rack rails is 165 lbs (75 kg). Do not exceed the maximum vehicle capacity when loading your vehicle. Information on loading the vehicle Information on loading the vehicle Heavy objects in the tailgate should be placed against the seat backrests. Ensure the backrests are securely engaged. If objects can be stacked, the heavier objects should be placed at the bottom. Secure objects in tailgate to prevent sliding.
70 Storage Driving with a roof load increases the sensitivity of the vehicle to cross-winds and has a detrimental effect on vehicle handling due to the vehicle’s higher centre of gravity. Distribute the load evenly and secure it properly with retaining straps. Adjust the tyre pressure and vehicle speed according to the load conditions. Check and retighten the straps frequently.
Instruments and controls Instruments and controls Controls 71 Caution Steering wheel adjustment Controls .........................................71 Warning lights, gauges and indicators .......................................80 Information displays ......................93 Vehicle messages .........................98 Trip computer ................................99 Vehicle personalization ...............
72 Instruments and controls Steering wheel controls Horn Windshield wiper/washer Windshield wiper GC3N5002A The infotainment system and the cruise control can be operated by the controls on the steering wheel. See Infotainment system. See Cruise control on page 219. GC3N5003A Press Y TDL033A To operate the windshield wipers, turn the ignition ON and move the windshield wiper / washer lever upward. 2: Continuous wipe, fast speed. 1: Continuous wipe, slow speed. 3: Intermittent operation.
Instruments and controls 3: Misting function. Misting function To operate the windshield wipers once in case of light rain or mist, lightly press the windshield wiper /washer lever down and release it. The lever will return automatically to its normal position when released. The wipers will operate through one cycle. Caution 73 Adjustable wiper interval Less than clear vision for the driver can lead to an accident resulting in personal injury and damage to your vehicle or other property.
74 Instruments and controls Windshield washer Caution Rear window wiper/washer Wiper Do not operate the windshield washer continuously for more than some seconds, or when the washer fluid tank is empty. This can cause the washer motor to overheat resulting in costly repairs. {Warning TDL030A Pull lever. Washer fluid is sprayed onto the windshield and the wiper swipes for one stroke. Do not spray washer fluid on the windshield in freezing weather.
Instruments and controls Washer Caution Less than clear vision for the driver can lead to an accident resulting in personal injury and damage to your vehicle or other property. Do not operate the tailgate window wiper when the tailgate window is dry or obstructed, as with snow or ice. TDL031A Push the lever toward the instrument panel. Washer fluid is sprayed onto the rear window and the wiper swipes for a few strokes.
76 Instruments and controls Clock Power outlets GC3N5004A GC3G5014A Time and date are shown in the infotainment display. Settings for time and date can be adjusted. See Infotainment system. GC3N5005A A 12V power outlet is located in the central console. Do not exceed the maximum power consumption of 120 watts.
Instruments and controls Caution Do not connect any current delivering accessories, e.g. electrical charging devices or batteries. Do not damage the sockets by using unsuitable plugs. {Warning Sparks may occur when connecting the unit to a power source, this is normal. Do not connect in the vicinity of flammable or explosive substances. Do not start the engine where the inverter is connected or running. GC3N5006A A 230V power outlet is located below the backward of center console.
78 Instruments and controls Cigarette lighter Caution Overheating the cigarette lighter can damage the heating element and the lighter itself. Do not hold the lighter in while it is heating. This can cause the lighter to overheat. Trying to operate a malfunctioning cigarette lighter can be dangerous. GC3G5001A To operate the cigar lighter, turn the ignition switch to ACC or ON and push the lighter in all the way.The cigar lighter will pop out automatically when it is ready to use.
Instruments and controls Caution Ashtrays 79 The portable ashtray can be placed in the cup holders. To open the ashtray, gently lift the lid of the ashtray. After using, close the lid firmly. The barrel of an operating cigarette lighter can become very hot. Do not touch the barrel of the cigarette lighter and do not allow children to operate or play with the cigarette lighter. To empty the ashtray for cleaning, slightly rotate upper part of the ashtray counterclockwise and remove it.
80 Instruments and controls Warning lights, gauges and indicators Odometer Speedometer GC3G5015A GC3N5016A THR012A Indicates vehicle speed. The odometer shows how far your car has been driven in kilometers or miles. There is independent trip odometer, which measure the distance your vehicle has travelled since you last reset this function.
Instruments and controls Tachometer 81 Fuel gauge Diesel Petrol GC3E5004A GC3E5003A Displays the engine revolutions per minute. Drive in a low engine speed range for each gear as much as possible. Caution If the needle is in the warning zone, the maximum permitted engine speed is exceeded. Engine is at risk. TEL039A Displays the fuel level in the tank. Never run the tank dry. Because of the fuel remaining in the tank, the top-up quantity may be less than the specified tank capacity.
82 Instruments and controls {Danger Before refueling, stop vehicle and switch off the engine. Service display Control indicators The control indicators described are not present in all vehicles. The description applies to all instrument versions. The actual in the vehicle may differ from the description. When the ignition is switched on, most control indicators will illuminate briefly as a functionality test.
Instruments and controls 83 Control indicators in the instrument cluster Type 1 GC3E5001B
84 Instruments and controls Type 2 GC3E5002B
Instruments and controls Transmission display Turn signal Safety belt reminders G flashes green. > for driver’s seat illuminates or flashes red. Flashes The control indicator flashes if a turn signal or the hazard warning flashers are activated. Fast flashing Failure of a turn signal lamp or associated fuse. See Bulb replacement on page 251. See Fuses on page 258. TGL023A It indicates the selected gear or transmission mode. See Turn and lane-change signals on page 110.
86 Instruments and controls Airbag and safety belt tensioner light U for front passenger airbag illuminates. Airbag on-off light When the control indicator illuminates the front passenger airbag is deactivated. 9 illuminates red. When the ignition is switched on, the control indicator illuminated for a few seconds. If it does not illuminate, does not go out after few seconds or illuminates whilst driving, there is a fault in the belt tensioner or in the airbag system.
Instruments and controls Charging system light Caution " illuminates red. It illuminates when the ignition is switched on and goes out shortly after the engine starts. Illuminates when the engine is running Stop, switch off engine. Battery is not charging. Engine cooling may be interrupted. Seek the assistance of a repairer. Malfunction indicator light * illuminates yellow. It illuminates when the ignition is switched on and goes out shortly after the engine starts.
88 Instruments and controls Brake system warning light $ illuminates red. Illuminates when the parking brake is released, if the brake fluid level is too low or if there is a brake system fault. See Brake fluid on page 247. {Warning Do not drive with the brake system warning lamp on. This may mean your brakes are not working properly. Driving with malfunctioning brakes can lead to a collision resulting in personal injuries and damage to your vehicle and other property.
Instruments and controls Electronic stability control (ESC) indicator light Electronic stability control (ESC) off light Fault due to sensors that are dirty d illuminates or flashes yellow. g illuminates yellow. Covered by ice or snow Illuminated A fault in the system is present. Continued driving is possible. Driving stability, however, may deteriorate depending on road surface conditions. Have the cause of the fault remedied by a repairer. Illuminates when the system is deactivated.
90 Instruments and controls Stop the vehicle in safe place, check tyres and inflate the tyres to the recommended pressure on the tyre inflation pressure label. When the system detects a malfunction, the light blinks for about one minute and then stays on for the remainder of the ignition cycle. The malfunction light comes on until the problem is corrected. Have the vehicle checked by a repairer. See Tyre Pressure Monitor Operation on page 267.
Instruments and controls Engine oil pressure light {Warning : illuminates red. It illuminates when the ignition is switched on and goes out shortly after the engine starts. Illuminates when the engine is running Caution Engine lubrication may be interrupted. This may result in damage to the engine and/or locking of the drive wheels. 91 Low fuel warning light . illuminates yellow. When the engine is off, considerably more force is needed to brake and steer.
92 Instruments and controls Reduced Engine Power light Daytime running lamps (DRL) light Taillamp Indicator Light w illuminates yellow. i illuminates green. It illuminates when the ignition is switched on and goes out shortly after the engine starts. Illuminates when the daytime running lamps are on. Illuminated when the taillamps are on. If the light comes with the service vehicle soon light while driving, there is a problem in the vehicle.
Instruments and controls 93 Compass recalibration Information displays Each menu can be selected turn the adjuster wheel in the turn signal lever. Driver Information Center (DIC) Engine oil life TDL169A To select the setting menu, press the MENU button in the turn signal lever. You can select the following order: GC3G5004A The Driver Information Center (DIC) is located in the instrument cluster.
94 Instruments and controls When the remaining oil life is low, the vehicle message code 82(Change engine oil soon) will appear in the Driver Information Center (DIC). The engine oil should be changed as soon as possible. After engine oil change, the engine oil life system must be reset. To reset, press the SET/CLR button a few seconds. See Engine oil on page 238. Press the SET/CLR button a few seconds. Language setting Turn the adjuster wheel to select one of the settings.
Instruments and controls Tyre learn This display allows for matching new tyre and wheel by the TPMS sensors. To process matching, press the SET/CLR button a few seconds. See Tyre pressure monitoring system light on page 89. Compass setting Tyre loading TNA020A 95 GC3E5005A Press the SET/CLR button a few seconds to select the menu. Turn the adjuster wheel to select one of the settings. Compass display This displays the vehicle's driving direction to 8-direction (N, NE, E, SE,S, SW, W, NW).
96 Instruments and controls Compass Zone Setting Geographic Zone(Area) GC3G5013A Press the SET/CLR button a few seconds to set compass zone and turn the adjuster wheel to select one of the settings. Zone(Area) should be selected properly based on Geographic zones(Area 1-15). Please confirm what you seleted , it will display a few seconds and go to Compass zone setting (set area).
Instruments and controls 97 Board information display (BID) Compass recalibration GC3G5011A GC3G5010A press the SET/CLR button for a few seconds to recalibrate and drive in circles (360) then compass will be flashing during driving. If you complete (360) driving, learned direction will be displayed and the display will go to Compass recalibration within 30 seconds.
98 Instruments and controls Vehicle messages Vehicle messages The messages are given via the Driver Information Center (DIC) or as warning chime. Depending on vehicle equipment and vehicle personalization some of the functions described below might not be available. Caution GC3N5004A Date, time, outside temperature and infotainment system information are displayed. If the vehicle message is shown, have the vehicle checked by a repairer immediately.
Instruments and controls No. Vehicle message Warning buzzers Trip computer When starting the engine or while driving Trip computer 23 Reversing light failure 24 License plate light failure 25 Left front turn indicator failure 26 Left rear turn indicator failure 27 Right front turn indicator failure 28 Right rear turn indicator failure 73 Service All Wheel Drive System 82 Change engine oil soon When the key is in the ignition switch.
100 Instruments and controls Average speed Driving distance for remaining fuel TDL168A To operate the trip computer, turn the adjuster wheel in turn signal lever. Each time you turn the adjuster wheel, the mode changes in the following order: Average speed Driving distance for remaining fuel Average consumption Driving time Average speed Some modes can be reset by pressing SET/CLR button. GC3G5006A This mode indicates the average speed.
Instruments and controls Note Average consumption 101 Driving time As an auxiliary device, the trip computer may have differences with the actual distance for remaining fuel according to circumstances. The driving distance for remaining fuel can be changed by the driver, the road, and the vehicle speed because it is calculated according to the changing fuel efficiency. GC3G5007A TDL127A This mode indicates the average consumption. This mode indicates the total driving time.
102 Instruments and controls Note The average speed, driving distance for remaining fuel, average consumption can differ from the actual distance according to driving conditions, driving pattern or vehicle speed. Vehicle personalization Vehicle personalization Press the CONFIG button, when ignition is ON and infotainment system is activated. The vehicle can be personalized by changing the settings in the infotainment display. Setting menus is displayed.
Instruments and controls Vehicle Settings Comfort settings Chime volume: Change the volume of warning chime. Personalization by driver: Activate or deactivate the personalization. Rear auto wipe in reverse: Activate or deactivate the rear wipe in reverse gear. Park assist / Collision detection Park assist: Activate or deactivate the ultrasonic sensors. Exterior ambient lighting Exterior lighting by unlocking: Activate or deactivate the entry lighting.
104 Instruments and controls Vehicle settings Comfort & Convenience Chime volume: Select the chime volume level. Auto wipe in reverse gear: Activate or deactivate the rear wipe in reverse gear. Collision/detection Park assist: Activate or deactivate the ultrasonic sensors. GC3N5004A Press the HOME button in the infotainment system, when ignition is ON and infotainment system is activated. Press the "Settings" and then press "Vehicle settings".
Instruments and controls Rear camera option Symbols: Select On or off Guide lines: Select On or off Vehicle factory settings: All settings are restored to initial settings.
Memo
Lighting 107 Lighting Exterior lighting Exterior lamp controls Exterior lighting............................107 Interior lighting .............................111 AUTO: Exterior lamps and instrument panel lamps are automatically turned on or off depending on external lighting conditions. ; : The tail lamps, number plate lamps, and instrument panel lamps are illuminated. Lighting features ..........................113 2 : The headlamps and all of the above lamps are illuminated.
108 Lighting Automatic light control Automatic light control function Headlamp high/low-beam changer Note The headlamp high-beam indicator illuminates when headlamps are on high beam. {Warning Always switch the high beam headlamps to low beam when you approach oncoming vehicles or when other vehicles ahead. High beam headlamps can temporarily blind other drivers, which could result in a collision.
Lighting 109 Headlamp range adjustment Manual headlamp range adjustment 3 = driver’s seat occupied and load compartment laden. Hazard warning flashers Headlamps when driving abroad The asymmetrical headlamp beam extends visibility at the edge of the road at the passenger side. However, when driving in countries where traffic drives on the opposite side of the road, adjust the headlamp to prevent dazzling of oncoming traffic. See Headlamps and parking lamps on page 252.
110 Lighting Turn and lane-change signals For three flashes, e.g. when changing lanes, press the lever until resistance is felt and then release. Front fog lamps Move the lever to the resistance point and hold for longer indication. Switch the indicator off manually by moving the lever to its original position. GO3E6007A JD14A lever up = right indicator lever down = left indicator If the lever is moved past the resistance point, the indicator is switched on constantly.
Lighting 111 Rear fog lamps Reversing lamps Interior lighting The reversing lamp come on when the ignition is on and reverse gear is selected. Instrument panel illumination control Misted lamp covers The inside of the light housing may mist up briefly in poor, wet and cold weather conditions, in heavy rain or after washing. The mist disappears quickly by itself; to help switch on the headlights GO3E6008A Operated with the s button.
112 Lighting Interior lamps Reading lamps Sun visor lamps This lamp turns on when the sun visor cover is opened. Courtesy light Note The battery can be discharged if the lights are turned on for a long time. {Warning GO3E6003A MD077 Operate rocker switch: R: always on until shut off manually. M: automatic switching on when you open a door and off after doors are closed. (: always off, even when doors are open. The front reading lamps are located in the overhead console.
Lighting 113 Lighting features Entrance lighting Exit lighting Entry lighting The following lights will additionally switch on when driver's door is opened: Headlights, sidelights and tail lights illuminate the way for an adjustable time after leaving the vehicle. Welcome lighting Headlights, sidelights, tail lights and interior lights are switched on for a short time when unlocking the vehicle with the remote control. This function facilitates locating the vehicle when it is dark.
114 Lighting Vehicles without automatic light 1. Switch off ignition. 2. Remove ignition key. 3. Open driver's door. 4. Pull turn signal lever. 5. Close driver’s door. If the driver's door is not closed the lights switch off after a few seconds. The lighting is switched off immediately if the turn signal lever is pulled while the driver's door is open. Vehicles with automatic light 1. Light switch in AUTO. 2. Switch off ignition. 3. Remove ignition key.
Infotainment system 115 Infotainment system Introduction Introduction Introduction..................................115 General Information Radio ...........................................128 The Infotainment system provides Infotainment in your car, using the latest technology. Audio Players ..............................142 Personalisation ............................162 Phone (only for Type A model)....
116 Infotainment system Screen Display The screen display may differ from the manual display since most screen displays differ according to the device’s setup and vehicle specification. Theft-Deterrent Feature The Infotainment system has an electronic security system installed to prevent theft. The Infotainment system only works in the vehicle in which it was first installed, and cannot be used by the people that have stolen it.
Infotainment system 117 Overview Infotainment System
118 Infotainment system Type A: Radio/DAB + CD/MP3 + AUX + USB/iPod + Bluetooth Type B: Radio + CD/MP3 + AUX (1) Display Display for Play/Reception/Menu state and information. (2) POWER/VOLUME button with control knob • Turn the power on/off by pressing this button. • Turn the control knob to adjust the overall volume. (3) PRESET [1 ~ 6 ] buttons • Hold down any these buttons to add the current radio station to the current Favourites page.
Infotainment system 119 (9) CD/AUX button Press button to select CD/MP3/AUX or USB/iPod/Bluetooth audio function (10) RADIO BAND button Press button to select AM/FM radio or DAB (Digital Audio Broadcasting: only for Type A model) function (11) TP button While using the FM RDS function, turn the TP (Traffic Programme) function on or off. (12) CONFIG button Press this button to enter the system setup menu. (13) TONE button Press this button to adjust/select the sound setup mode.
120 Infotainment system Steering wheel audio control Type 1 : option
Infotainment system 121 (1) Mute/Hang up button • Press the button in any music play mode to turn the mute function on and off. In engaged mode, you can press this button to reject calls or to finish the call. (3) Source [_SRC^] button/control knob • Press the button to select a sound play mode. • Turn the control knob to change the registered radio stations or change the music being played. (2) Call button • Press the button to answer the call or enter the re-dial selection mode.
122 Infotainment system Steering wheel audio control Type 2 : option
Infotainment system 123 (1) Mute/Hang up button Press the button to turn the mute function on and off (3) Source [_SRC^] button/control knob • Press the button to select a sound play mode. • Turn the control knob to change the registered radio stations or change the music being played. (4) Volume [+ -] buttons • Press the + button to increase the volume • Press the - button to decrease the volume.
124 Infotainment system Turning off automatically Volume control When the ignition switch (car ignition key) is in the off position, turning on the Infotainment system by using the POWER/VOLUME button will automatically turn the Infotainment system off after ten minutes from the user’s last operation.
Infotainment system 125 Volume limit by high temperature Tone Settings If the inside temperature of the radio is very high, the Infotainment system will limit the controllable maximum volume. If necessary, the volume will automatically decrease. From Tone setup menu, sound features can be setup differently according to the FM/AM/DAB radio and each audio player's functions. Press the TONE button when using the relevant functioning mode.
126 Infotainment system Tone setup menu • Bass: Adjust the bass level from -12 to +12. • Midrange: Adjust the midrange level from -12 to +12. • Treble: Adjust the treble level from -12 to +12. • Fader: Adjust the front/rear speaker balance from front 15 to rear 15 in the six speaker system vehicle model. • Balance: Adjust the left/right speaker balance form left 15 to right 15.
Infotainment system 127 • From the steering wheel remote control knob, press Source [_SRC^] to select the desired mode. Press the MENU-TUNE button to open the menu with options for the relevant function or the menu of the relevant device (Except for the Bluetooth audio). Bluetooth hands-free phone device Press the PHONE/MUTE button to select the Bluetooth hands-free phone function (only for Type A models). Press the PHONE/MUTE button to open Bluetooth with options for the relevant function.
128 Infotainment system Radio AM/FM Radio and DAB (only for Type A model) Before using AM-FM Radio Main buttons/control knob (10) RADIO BAND button Press button to select AM/FM radio or DAB (Digital Audio Broadcasting: only for Type A model) function (14) MENU-TUNE button with control • Turn this control knob to manually find a broadcasting frequency. • Press this button to access the menu screen from the current mode. (16) / BACK button Cancel the input item or return to the previous screen/menu.
Infotainment system 129 Listening to radio or DAB station Searching for radio station automatically Seeking for DAB service component automatically Press the tSEEKu buttons to automatically search for available radio stations with good reception. Press the tSEEKu buttons to automatically seek for available DAB service component in current ensemble. To skip to the previous/next ensemble, press the tSEEKu buttons.
130 Infotainment system Seeking for radio station Seeking for DAB ensemble Linking the DAB service [DAB-DAB on/DAB-FM off] Hold down the tSEEKu buttons to quickly change the frequency, and then release the button at the desired frequency. Press and hold the tSEEKu buttons to automatically seek for available DAB service component with good reception.
Infotainment system 131 [DAB-DAB off/DAB-FM on] [DAB-DAB on/DAB-FM on] • When you setup the Auto linking DAB-FM is activated, if the DAB service signal is weak, the infotainment system received the linked service component automatically. (refer to Settings Radio settings DAB settings Auto linking DAB-FM) Tuning a radio station manually Turn the MENU-TUNE control knob to manually find the desired broadcasting frequency.
132 Infotainment system Tuning a DAB station manually Using the DAB stations list Turn the MENU-TUNE control knob to select the desired list, and then press the MENU-TUNE button to receive the relevant broadcasting channel. Showing the DAB information From the DAB mode, press the MENU-TUNE button to enter the DAB menu. Turn the MENU-TUNE control knob to select the DAB manual tuning, and then press MENU-TUNE button.
Infotainment system 133 • The number 1 broadcasting information of the selected FAV (Favourites) preset page will be displayed. Using the PRESET buttons Registering PRESET button Press FAVOURITE [FAV1-2-3] button to select the desired page of saved favourites. Hold down any of PRESET [1 ~ 6] buttons to register the current radio or DAB station to that button of the selected Favourites page. • Up to Favourites pages can be saved, and each page can store up to six radio or DAB stations.
134 Infotainment system Listening to PRESET button directly Press a PRESET [1 ~ 6] buttons to directly listen to the radio/DAB station saved to that button. AM/FM/DAB menu Favorites list Using the radio or DAB menu Repeatedly press the FAVOURITE [FAV1-2-3] button to select the desired FAV (Favourites) preset page. • The number 1 broadcasting information of the selected FAV (Favourites) preset page will be displayed. Press the MENU-TUNE button to display the radio or DAB menu..
Infotainment system 135 Turn the MENU-TUNE control knob to move to the desired Favourites list, and then press MENU-TUNE button to receive relevant broadcasting channel. AM/FM menu FM/AM station list • The Station list information will be displayed. Turn the MENU-TUNE control knob to move to the desired list, and then press the MENU-TUNE button to receive the relevant broadcasting channel.
136 Infotainment system DAB menu DAB announcements Turn the MENU-TUNE control knob to select the desired lists, and then press the MENU-TUNE button to receive the relevant broadcasting frequency. AM/FM/DAB menu Update AM/FM/DAB stations list From the DAB menu, turn the MENU-TUNE control knob and move to the DAB announcements, and then press MENU-TUNE button. • The DAB announcement list will be displayed.
Infotainment system 137 RDS (Radio Data System) • The Radio Data System (RDS) is a service by FM stations that considerably makes it easier to find radio stations with fault-free reception. View RDS broadcasting information While receiving RDS broadcasting, press the INFORMATION [INFO] button to check RDS broadcasting information that is being received. Configuring RDS • RDS stations are indicated by the programme name instead of the broadcasting frequency.
138 Infotainment system Switching regionalisation on and off RDS must be activated for regionalisation. At certain times some RDS stations broadcast regionally different programmes on different frequencies. Set the option Regional (REG) to On or Off. From RDS settings menu, turn the MENU-TUNE control knob to move to RDS: Off, and then press the MENU-TUNE button to turn on the RDS function. Only alternative frequencies (AF) with the same regional programmes are selected.
Infotainment system 139 Switching the Text scroll freeze on and off Volume of the traffic announcements (TA) To switch the text scroll freeze function(for displaying the information of programme service) on or off. The minimum volume of the traffic announcements (TA) can be preset. The minimum volume of the traffic announcements can be increased or reduced in comparison to the normal audio volume. Turn the MENU-TUNE control knob to adjust the TA volume level, and then press the MENU-TUNE button.
140 Infotainment system Blocking out traffic announcements To block out a traffic announcement, e.g. during CD/MP3 replay or radio reception: • If the radio traffic service is switched on, then [ ] is displayed in the radio main menu. • If the current station is not a radio traffic service station, then a search is automatically started for the next radio traffic service station. • Once a radio traffic service station has been found, [TP] is displayed in the radio main menu.
Infotainment system 141 • The traffic announcement is aborted, but the radio traffic service remains switched on. Fixed Mast Antenna Caution Be sure to remove the antenna before entering a place with a low ceiling or it may be damaged. Blocking out current traffic announcements To block out a current traffic announcement e.g. during TA radio reception: Entering the automatic car wash with the antenna installed may result in damage to the antenna or the roof panel.
142 Infotainment system Audio Players CD Player The CD/MP3 player of this system can play audio CD and MP3 (WMA) discs. Before using CD player Important information about audio CD and MP3(WMA) discs Caution In any case, do not insert any DVDs, mini discs with a diameter of 8cm, or discs with abnormal surfaces in this CD/MP3 (WMA) player. Do not put any stickers on the disc surface. Such discs may be stuck in the CD player and damage the drive device.
Infotainment system 143 Usable disc type • This product can play Audio CD/MP3 (WMA) discs. - CD-DA: CD-R/CD-RW - MP3(WMA): CD-R/CD-RW/CD-ROM • MP3 (WMA) files below cannot be played. - File encoded in MP3i (MP3 interactive) or MP3 PRO standards - MP3 (WMA) file encoded in non-standards - MP3 files that are not in MPEG1 Layer3 format Cautions for using disc • Do not use any of the discs described below. Excessive use of these discs in the player may cause problems.
144 Infotainment system • Do not smear any chemical substances on the disc. Clean discs of dirt with a moist, soft cloth, wiping from the centre to the edge. Caution for using CD-R/RW disc • When using CD-R/CD-RW discs, only the discs that has been "finalized" can be used. • Discs that are created with a PC may not play according to the application program setup and environment.
Infotainment system 145 Caution for using MP3/WMA music files • This product can play MP3 (WMA) files with .mp3, .wma (lower case letters) or .MP3 and .WMA (capital letters) file name extensions. • MP3 files that can be played by this product are as follows. - Bit rate: 8 kbps ~ 320 kbps - Sampling frequency: 48 kHz, 44.1 kHz, 32 kHz (for MPEG-1), 24 kHz, 22.
146 Infotainment system Playing CD/MP3 Main buttons/Control (9) CD/AUX button Select the CD/MP3 player. (14) MENU-TUNE button with control • Turn the button/control knob to move to the track list, menu, or MP3 (WMA) track information item. • Press the button/control knob to display the menu screen for the current item or current mode. (8) tSEEKu buttons • Press these buttons to play the previous or next track.
Infotainment system 147 Eject disc • Once the reading of disc information is completed, it will automatically play from track 1. • When a non-readable disc is inserted, he disc will automatically be ejected with the display of a disc error message, and then the system will switch to the previously used function or the FM radio. When a disc to be played is already inserted, repeatedly press CD/AUX button to select CD/MP3 play.
148 Infotainment system Changing playing position Changing playing track Press the tSEEKu buttons in play mode to play the previous or next track. • Using the steering wheel remote control knob, tracks can be easily changed by turning the Source [_SRC^] control knob. Or turn the MENU-TUNE control knob to move to the play track list, and then press MENU-TUNE button to instantly change it. Hold down the tSEEKu buttons during play mode to rewind or fast-forward through the song.
Infotainment system 149 View information on playing track Press the INFORMATION [INFO] button in play mode to the display information about the track being played. • If there is no information on the playing track for audio CDs, then the system will display "No information." For MP3 (WMA) tracks, more information can be viewed by turning the MENU-TUNE control knob from the track information display.
150 Infotainment system CD Menu Track list Using CD menu Changing the playback mode From the play mode, press the MENU-TUNE button to display the CD menu. Turn the MENU-TUNE control to select the shuffle or repeat playback functions, and then press the MENU-TUNE button to turn the relevant functions on or off. For Audio CD discs, turn the MENU-TUNE control knob from the CD menu to move to the track list, and then press the MENU-TUNE button.
Infotainment system 151 CD Menu Searching Folders For MP3 (WMA) discs, turn the MENU-TUNE control knob from the CD menu to move to the desired folder, and then press MENU-TUNE button. Turn the MENU-TUNE control knob to move to the desired folder, and then press MENU-TUNE button. CD Menu Search... Turn the MENU-TUNE control knob to find the desired track, and then press MENU-TUNE button to play the selected track from the selected folder.
152 Infotainment system • However, it may take a long time to read the disc depending on the number of music files Press the MENU-TUNE button again, and from the displayed search item, turn the MENU-TUNE control to select the desired play mode. • The number of relevant songs will be displayed by Playlist [iP]/Artist [iA]/Album [iL]/Songs [iS]/Genre [iG].
Infotainment system 153 Auxiliary Devices USB player (only for Type A model) Cautions for using USB devices • Operation cannot be guaranteed if the HDD built-in USB mass storage device or CF or SD memory card is connected by using a USB adaptor. Use a USB of flash memory type storage device. • Take caution to avoid static electricity discharge when connecting or disconnecting the USB. If connection and disconnection are repeated many times in a short time, this may cause a problem in using the device.
154 Infotainment system This may cause damage to the product or the performance of the USB device. • Disconnect the connected USB storage device when the vehicle ignition turned off. If the ignition is turned on while the USB storage device is connected, the USB storage device may be damaged or may not operate normally in some cases. Caution USB storage devices can only be connected to this product for the purpose of playing music files.
Infotainment system 155 About MP3 (WMA) music files • The MP3 files that can be played are as follows. - Bit rate: 8 kbps ~ 320 kbps - Sampling frequency: 48 kHz, 44.1 kHz, 32 kHz (for MPEG-1) 24 kHz, 22.05 kHz, 16 kHz (for MPEG-2) • This product displays MP3 (WMA) files with the mp3, .wma (lower case letters) or .MP3 or .WMA (capital letters) file name extensions. • This product can display ID3 tag (Version 1.0, 1.1, 2.2, 2.3, 2.4) information about album, artist, etc. for MP3 files.
156 Infotainment system (8) tSEEKu buttons • Press these buttons to play the previous or next track. • Hold down these buttons to rewind or fast forward, and then release to play at normal speed. Connecting the USB storage device (7) INFORMATION [INFO] button Display the information of the track being played. (16) / BACK button Cancel the input item or return to the previous menu. Connect the USB storage device with music files to be played to the USB connecting terminal.
Infotainment system 157 If the USB storage device to be played is already connected, repeatedly press the CD/AUX button to select the USB player. • It will automatically play from the previous playing point. Afterwards, the functions of the USB player are operated similarly to CD/MP3 playback. Using the USB menu The instructions for "Shuffle songs/ Repeat/Folders/Search..." from the USB menu are similar to the CD/MP3 player's CD menu; only the "Remove USB" item has been added.
158 Infotainment system iPod player (only for Type A model) Limited to models supporting the iPod connection Main buttons/Control knob The following main buttons and controls are used to play the iPod music files. (9) CD/AUX button Press this button repeatedly when the iPod is connected to select the iPod play mode. (14) MENU-TUNE button with control • Turn the control knob to move and display the track list that is playing.
Infotainment system 159 • Only connect the iPod to this product with connection cables supported by iPod products. Other connection cables cannot be used. • In some cases, the iPod product may be damaged if the ignition is turned off when it is connected to the product. When the iPod product is not being used, keep it separately from this product with the car ignition turned off. • Once the product finishes reading the information on the iPod device, it will play automatically.
160 Infotainment system • Refer to the following table for the classification items related to the search function provided by the iPod product. Using the iPod menu From the iPod menu, the instructions for "Shuffle songs/Repeat/Search... (including Audio books and Composers)" are similar to CD/MP3 player’s CD menu; only the "Eject iPod" item has been added. Refer to each item of CD/MP3 for use. iPod menu Eject iPod Afterwards, the functions to play the iPod are operated similarly to CD/MP3 playback.
Infotainment system 161 Exterior Sound (AUX) Input Limited to models supporting external sound connection Main buttons/Control knob The following main buttons and controls are used to enjoy the rich sound of the Infotainment system from the sound output of a connected exterior sound device. Connecting an exterior sound Connect the audio output of the external audio equipment to AUX input terminal 1 or 2. • AUX 1: Positioned in the Infotainment device • AUX 2: Positioned inside the glove box.
162 Infotainment system Personalisation Personalisation Main buttons/control knob • The buttons and control knob used in the system setup are as follows. (12) CONFIG button How to Use the Setup Menu for personalisation • Setup menus and functions may differ according to car model. • Reference: Table of formation for setup menu on the next page formation for setup menu on the next page, turn the MENU-TUNE control to move to the desired setup menu, and then press MENU-TUNE button.
Infotainment system 163 Table of information for settings [Languages] Turn the MENU-TUNE control knob to attain the desired setup value or functioning state, and then press MENU-TUNE button. • If the relevant detailed list is made of several items, then repeat this action. • Set/enter the relevant setup value or the functioning state will change. Selection of the desired language.
164 Infotainment system [Time Date] MM/DD/YYYY : Jan. 23, 2012 RDS clock synchronization: Select On or Off [Radio Settings] AS-Stations: Set the Auto Store stations function for each radio or DAB. RDS options: Set the RDS options. - RDS: On/Off (activate or deactivate the RDS function). - Regional: On/Off (activate or deactivate the Regional function). - Text scroll freeze: Select On or Off. - TA volume: Set the TA volume. DAB settings: Set the RDS options.
Infotainment system 165 [Bluetooth Settings] Restore factory settings: Restore the initial setup values back to the default settings. [Vehicle settings] - Auto rear demist: on/off (activate or deactivate auto rear demist). Comfort settings - Chime volume: Change the volume of warning chimes. - Rear auto wipe in reverse: Activate or deactivate automatically switching on of the rear window wiper when reverse gear is engaged.
166 Infotainment system Power door locks - Auto door unlock: Activate or deactivate the automatic door unlocking function after switching off ignition. Remote locking, unlocking, starting - Remote door unlock(Passive Entry Unlock: Change the configuration to unlock only the driver’s door or the whole vehicle whilst unlocking. - Remote door unlock(Passive Entry Lock: Select Horn on passive door lock, On or Off. - Remote left in vehicle alarm: Select On or Off.
Infotainment system 167 Connecting Bluetooth • If there already is a Bluetooth device connected to the Infotainment system, the "Bluetooth is busy" message will appear. • Connection standby will be displayed with a message and a security code. (The initial value is 0000, and can be changed from Settings Bluetooth settings Bluetooth Changing Bluetooth code item.) Registering the Bluetooth device Register the Bluetooth device to be connected to the Infotainment system.
168 Infotainment system Connecting/Deleting/Separating the Bluetooth Devices • The Infotainment system can register up to five Bluetooth devices. • In some Bluetooth devices, it is only possible to use it when "Always connect" item is set. Press the CONFIG button, and use the MENU-TUNE button with control knob, to move to Settings Bluetooth settings Bluetooth Device list and then press the MENU-TUNE button.
Infotainment system 169 You can register by using the MENU-TUNE button with control knob, moving to select the item, moving to delete the item to delete, and then pressing the MENU-TUNE button. • Disconnecting the currently connected Bluetooth device, from the device list screen, select the connected device, which will display Disconnect item, and then press the MENU-TUNE button.
170 Infotainment system • Sometimes, Bluetooth can only be connected through hands-free or the Bluetooth audio play functions despite a stereo headset being connected. In this case, try and reconnect the Infotainment system using the Bluetooth device. • For Bluetooth devices that do not support stereo headsets, the Bluetooth audio play function cannot be used. • It is not possible to listen to the music through the Bluetooth audio if an iPhone is connected through a USB connector.
Infotainment system 171 • The sound played by the Bluetooth device is delivered through the Infotainment system. • For Bluetooth audio to play, the music must at least be played once from the music player mode of the mobile phone or Bluetooth device after connecting as a stereo headset. After being played at least once, the music player will automatically play upon entering play mode, and it will automatically stop when the music player mode ends.
172 Infotainment system If Bluetooth audio playback is not functioning, then check to see if the mobile phone is in the waiting screen mode. • Sometimes, sounds may be cut off during the Bluetooth audio playback. The Infotainment system outputs the audio from the mobile phone or Bluetooth device as it is transmitted. Bluetooth error messages and measures • Bluetooth deactivated Check if Bluetooth activation is setup as ON. The Bluetooth function can be used upon turning on Bluetooth activation.
Infotainment system 173 Hands-free phone Caution Taking calls It is possible to transfer your ringtone depending on the mobile phones. Adjust the ringtone volume of the mobile phone if the volume is too low. To talk on the phone, press Call button on the steering wheel remote control or turn the MENU-TUNE control knob to move to the Answer function, and then press the MENU-TUNE button.
174 Infotainment system • While conversing, it is possible to block the transmitted sound by selecting the Mute Microphone item by using the MENU-TUNE button with control knob. • While conversing, hold down the Call button from the steering wheel remote control to change to the private call mode (some phones may not support the private call mode depending on the phone's options).
Infotainment system 175 Ending a call Calling by Re-dial To end the a call, press Mute/Hang up button on the steering wheel remote control or turn the MENU-TUNE control knob to move to the Hang up, and then press the MENU-TUNE button. From the steering wheel remote controller, press the Call button to display the redial guidance screen, or hold down the button to display the caller log screen.
176 Infotainment system • Depending on the mobile phone, there are cases in which the call is made through the call history of the received or missed calls instead of the redial mode. This depends on the mobile phone's options. Use MENU-TUNE button with control knob to use the functions in the menu that appears. • While conversing on the phone, hold down the Call button on the steering wheel remote controller to switch to Private Mode.
Infotainment system 177 • Refer to the following contents to edit the input contents. 1 Move: Move input position 2 Delete: Delete input character 3 Phone book: Search contacts (usable after updating the phone numbers) 4 Dial: Begin dial Turn the MENU-TUNE control knob to select the desired letters, and then press the MENU-TUNE button to enter the number. • Repeat this item to enter all telephone numbers.
178 Infotainment system Using the Phone Menu Phone Menu Phone book Search Turn the MENU-TUNE control knob to select Search, and then press the MENU-TUNE button. Turn the MENU-TUNE control knob to select First or Last Name, and then press MENU-TUNE button. Press the MENU-TUNE button, turn the MENU-TUNE control knob to select Phone book, and then press the MENU-TUNE button. • A notification will appear on screen, with no contacts to use, and you will be returned to the previous menu.
Infotainment system 179 Phone Menu Phone book Update To call the relevant number, press the MENU-TUNE button. • For more directions, refer to the making phone calls item. Update the contacts of the connected mobile phone to the system’s contacts. Using the MENU-TUNE button with control knob, select Phone Menu Phone book Update, and then press the MENU-TUNE button. Turn the MENU-TUNE control knob to select Yes or No, and then press the MENU-TUNE button to activate or cancel update.
180 Infotainment system Notice for updating contacts • This function can be used with mobile phones that support contacts update and the call history transmission function. (If the product is connected to a mobile phone that does not support these functions, the call history can be displayed through the Infotainment system.) • Update is not supported for more than 1,000 contact numbers.
Infotainment system 181 • When the contacts update or call history transmission is completed, all hands-free and Bluetooth audio play modes will be automatically disconnected and then reconnected. • If the Infotainment system gets turned off while conversing on the phone, the call will be transmitted to the mobile phone. Some phones may need to setup a call transmission function beforehand, depending on the type of the phone.
182 Infotainment system Phone Menu Phone book Delete all Turn the MENU-TUNE control knob to select Yes or No, and then press theMENU-TUNE button to delete all contacts or to cancel. Phone Menu Call lists Check, use, or delete contacts. Every single phone number that has been stored in the system contacts will be deleted. Use the MENU-TUNE button with control knob to select Phone Menu Phone book Delete All, and then press the MENU-TUNE button.
Infotainment system 183 Turn the MENU-TUNE control knob to check the call history and to make a call. Press the MENU-TUNE button to call the selected number from the call history. • If the "Please wait" screen continues to be displayed for too long after selecting the call log, check if the mobile phone is requesting verification of the transfer of call numbers. After completing the mobile phone verification procedures, the contacts and the call log will be transmitted to the Infotainment System.
184 Infotainment system button with control knob to set up the desired item. It is possible that the ringtones you already have are transferred to the Infotainment system depending on the mobile phone. For such mobile phones, it is not possible to use the selected ringtone. For mobile phones that transfer your ringtones, the volume of the ringtone will be based on the volume transmitted from the mobile phone. Adjust the ringtone volume of the mobile phone if the volume is too low.
Climate controls Air recirculation / Climate controls Climate control systems Climate control systems ..............185 Heating and ventilation system Air vents ......................................192 185 Heated rear window and outside mirror Maintenance ................................193 Temperature Adjust the temperature by turning the knob. red: warm blue: cold Heating will not be fully effective until the engine has reached its operating temperature.
186 Climate controls Air distribution Heating Maximum heating Select air outlet by turning the knob. Normal heating Use the maximum heating mode for quick heating. Y: Air flow is directed to the upper body. Each vent can be adjusted. \: Air flow is directed to the upper body and floor. [: Most of the air flow is directed to the floor, with a small amount of the air directed to the windshield and side vents. 1. Turn temperature control knob to red area for heating. 2. Turn air distribution knob. 3.
Climate controls 1. Push recirculation button for the recirculation mode. 2. Turn temperature control knob all the way to the red area for heating. 3. Turn fan control knob to maximum speed. Defrosting windshield 187 Caution The difference between the outside air and the temperature of the windshield can cause the windows to fog, thereby restricting your front vision. Do not use FLOOR/DEFROST W or DEFROST 5 in extremely humid weather when the temperature control knob is set to the blue area.
188 Climate controls Air recirculation system W {Warning Driving with recirculation mode for prolonged period of time can make you sleepy. GC3E8005A The air recirculation mode is operated with the W button. The exchange of fresh air is reduced in air recirculation mode. In operation without cooling the air humidity increases, so the windows may mist up. The quality of the passenger compartment air deteriorates, which may cause the vehicle occupants to feel drowsy.
Climate controls Air conditioning system {Warning Do not sleep in a vehicle with the air conditioning or heating system on. It may cause serious harm or death due to a drop in the oxygen level and/or body temperature. 189 Air distribution Air distribution Demisting and Defrosting Select air outlet by turning the knob. Air recirculation W Y: Air flow is directed to the upper body. Each vent can be adjusted. Cooling u Temperature Adjust the temperature by turning the knob.
190 Climate controls Demisting windshield 4. Adjust the fan control knob to desired speed. Air recirculation system W Driving with recirculation mode for prolonged period of time can make you sleepy. Periodically turn to the outside air mode for fresh air. The exchange of fresh air is reduced in air recirculation mode. In operation without cooling the air humidity increases, so the windows may mist up.
Climate controls Cooling u Operated with the u button and is functional only when the engine and fan are running. The air conditioning system cools and dehumidifies (dries) when outside temperature is a little above the freezing point. Therefore condensation may form and drip from under the vehicle. If no cooling or drying is required, switch the cooling system off to save fuel. The air conditioning will not operate when the fan control knob is in the off position.
192 Climate controls 4. Turn fan control knob to highest speed. Air vents Adjustable air vents At least one air vent must be open while cooling is on in order to prevent the evaporator from icing up due to lack of air movement. TDL123A Turn the knob counterclockwise to open the side vents, and rotate it to the direction you want. If you do not want the flow, turn the knob clockwise. GC3E8001A The central vent is not closed completely. Direct the flow of air by tilting and swiveling the slats.
Climate controls 193 Fixed air vents Maintenance Additional air vents are located beneath the windshield and front door windows and in floor. Passenger compartment air filter Air intake The filter cleans dust, soot, pollen, spore from the air entering the vehicle through the air intake. GO3E8015A The air intake in front of the windshield in the engine compartment must be kept clear to allow air intake. Remove any leaves, dirt or snow. GO3E8016A Filter replacement: 1. Remove the glove box.
194 Climate controls Caution More frequent maintenance of the air filter is required if the driving circumstances are dusty roads, air pollution areas, and frequent unpaved roads. The bronchus may be affected and the efficiency of the filter decreased. TDL133A 2. Remove the filter cover by unclipping out both sides of the cover. 3. Replace the air conditioner filter. 4. Assemble the filter cover and glove box in reverse order.
Climate controls Caution Use only correct refrigerant. {Warning Climate control systems are serviced by qualified personnel only. Improper service methods may cause personal injury.
Memo
Driving and operating 197 Driving and operating Driving information ......................197 Driving information Starting and operating Control of a vehicle New vehicle break-in Never coast with engine not running Use the following precautions for the first few hundred kilometres(miles) to improve the performance and economy of your vehicle and add to its long life: Manual transmission ...................211 Many systems will not function in this situation (e.g. brake servo unit, power steering).
198 Driving and operating Ignition positions {Danger Do not turn the key to 0 or 1 position while driving. Starting the engine Starting engine with the ignition switch Vehicle and brake assistance would not operate, causing vehicle damage, personal injury or possibly death.
Driving and operating 199 Diesel engine: turn the key to position 2 for preheating until K goes out. Turn the key to position 3, depressing the clutch pedal and footbrake then release when engine is running. Before restarting or to switch off the engine, turn key back to 0. Caution Do not operate starter motor for more than 10 seconds at a time. If the engine does not start, wait 10 seconds before trying again. This will prevent starter motor damage.
200 Driving and operating Automatic engine stop If the vehicle is at low speed or in standstill, activate the automatic engine stop as follows: Shift the selector lever to N Release the clutch pedal The engine will be turned off while the ignition ON. During an automatic engine stop, the heating performance, power steering and brake performance will maintain.
Driving and operating 201 Restart of the engine by the driver Restart of the engine by the stop-start system Depress the clutch pedal to restart the engine. If one of the following conditions occurs during engine stop, the engine will be restarted automatically by the stop-start system. The engine start is indicated by the needle on the idle speed position in the tachometer. If the selector lever is shifted out of N before depressing the clutch first, # illuminates.
202 Driving and operating Close windows. Engine exhaust Lock the vehicle and activate the anti-theft alarm system. Engine exhaust {Danger Engine exhaust gases contain poisonous carbon monoxide, which is colourless and odourless and could be fatal if inhaled. If exhaust gases enter the interior of the vehicle, open the windows. Have the cause of the fault rectified by a repairer. Avoid driving with an open tailgate, otherwise exhaust gases could enter the vehicle.
Driving and operating 203 The control indicator L and vehicle message or code extinguishes as soon as the self-cleaning operation is complete. Caution If the cleaning process is interrupted more than once, there is a risk of provoking severe engine damage. GC3E9003A Under certain driving conditions, e.g. short distances, the system cannot clean itself automatically. If the filter requires cleaning control indicator L flashes.
204 Driving and operating In the event of misfiring, uneven engine running, a reduction in engine performance or other unusual problems, have the cause of the fault rectified by a repairer as soon as possible. In an emergency, driving can be continued for a short period, keeping vehicle speed and engine speed low. Caution Don’t touch the catalytic converter during engine operation. The catalytic converter remains hot for a long period after engine operation.
Driving and operating 205 Transmission Display Selector lever D: This drive position is for all normal driving conditions. Allows the transmission to shift into all 6 forward gears. M: Manual mode position. TGL023A It is located in the instrument cluster. It indicates the selected gear or transmission mode. GC3N9002A P (PARK): Locks the front wheels. Select P only when the vehicle is stationary and the parking brake is applied. R (REVERSE): Reverse transmission position.
206 Driving and operating Caution Shifting between gear positions Do not accelerate while engaging a gear. Never depress the accelerator pedal and brake pedal at the same time. When a gear is engaged, the vehicle slowly begins to creep when the brake is released. Do not use the P (Park) position in place of the parking brake. Turn off the engine, apply the parking brake, and remove the ignition key when leaving the vehicle. Never leave the vehicle unattended while the engine is running.
Driving and operating 207 Manual mode MD174 Push the release button to shift. Arrows indicate shifts that do not require you to push the release button. MD173 Shift freely. GC3N9004A Move selector lever position M. MD172 Depress the brake pedal and push release button to shift. Shifts that require you to push the release button are indicated by arrows. Press the shift gear button in the side of the selector lever. UP (+): to shift up gear. DOWN (-): to shift down gear.
208 Driving and operating In manual mode, downward shifts are made automatically when the vehicle slows down. When the vehicle stops, 1st gear is automatically selected. Engine braking Rocking the vehicle To help use the braking effect of engine compression when driving on a long downhill select manual mode downshift to a lower gear in a sequential order. Rocking the vehicle is only permissible if the vehicle is stuck in sand, mud or snow. Caution Shift properly according to road conditions.
Driving and operating 209 Kickdown Fault Release selector lever In the event of a fault, the malfunction indicator light illuminates. The transmission no longer shifts automatically nor manually because it is locked in a certain gear. Before shifting from park (P), the ignition must be ON and you must depress the brake pedal all the way down. If you cannot shift out of P with the ignition ON and the brake pedal depressed: Have the cause of the fault remedied by a repairer.
210 Driving and operating {Warning To help prevent damage to the transmission, observe the following precautions: Do not press the accelerator pedal while shifting from P or N to R or a forward gear. To do so may not only damage the transmission, but could cause you to lose control of the vehicle. GC3N9005A GC3N9006A Use D as much as possible. 3. Remove the cap on the console with a thin object such as a flat-head screwdriver. 4. Insert and press the ignition key into the slot. 5. Shift to neutral (N).
Driving and operating 211 {Warning Otherwise transmission could be damaged or vehicle could move unexpectedly, causing driver to lose control of the vehicle, resulting in personal injury or damage to the vehicle or other property. Manual transmission Manual transmission Do not grind the clutch unnecessarily. When operating, depress the clutch pedal completely. Do not use the pedal as a foot rest. Caution It is inadvisable to drive with hand resting on the selector lever.
212 Driving and operating Drive Systems Consult a repairer to repair the problem as soon as possible. Brakes All-Wheel Drive Brakes If your vehicle has active on demand all-wheel drive (AWD), the AWD system operates automatically without any action required by the driver. If the front drive wheels begin to slip, the rear wheels will automatically begin to drive the vehicle as required. There may be a slight engagement noise during hard use but this is normal.
Driving and operating 213 Caution Caution {Warning If one of the circuits fail, the brake pedal must be pressed with greater pressure and the braking distance may be increased. Have the brake system checked and repaired by a repairer immediately. We recommend that you consult your authorised repairer. Do not drive with your foot resting on the brake pedal. Do so will accelerate wear of the brake components.
214 Driving and operating Antilock brake system (ABS) Do not decrease the pressure applied to the footbrake. Antilock brake system (ABS) prevents the wheels from locking. When you start the vehicle after ignition is switched on, mechanical sounds can be heard. This is normal ABS function. ABS starts to regulate brake pressure as soon as a wheel shows a tendency to lock. The vehicle remains steerable, even during hard braking.
Driving and operating 215 Parking brake See Brake system warning light on page 88. Ride control systems Brake assist Traction Control system (TCS) If the brake pedal is depressed quickly and forcefully, maximum brake force is automatically applied (full braking). GC3N9008A Always apply parking brake firmly without operating the release button, and apply as firmly as possible on a downhill or uphill slope.
216 Driving and operating {Warning Electronic stability control (ESC) Deactivation Do not let this special safety feature tempt you into taking risks when driving. The electronic stability control (ESC) system helps to stabilise the vehicle during cornering maneuvers. Adapt speed to the road conditions. ESC applies the brakes on individual wheels and intervenes with the engine control system to stabilise the vehicle. GC3N9009A TCS can be deactivated when spinning of drive wheels is required.
Driving and operating 217 {Warning Deactivation {Warning Do not let this special safety feature tempt you into taking risks when driving. Adapt speed to the road conditions. See Electronic stability control (ESC) indicator light on page 89. GC3N9009A For very high-performance driving ESC can be deactivated. Pressing the g button for several seconds until control indicator g and i illuminates. ESC is reactivated by pressing the g button again.
218 Driving and operating Hill descent control (HDC) system HDC operational conditions When travelling down steep gradients, this function allows you to travel at a low speed without any depression of the brake pedal and makes you concentrate on steering. This convenient function is only for driving down steep gradients. GC3N9012A To activate HDC, press the HDC button. When the button is pressed, HDC is ready for use. The HDC active indicator 5 comes on.
Driving and operating 219 Caution Cruise control {Warning Cruise control can be dangerous where you cannot drive safely at a steady speed. HDC is designed for driving off-road on steep gradients. Unnecessary usage of HDC can cause malfunctions in the brake system or ESC. Do not use HDC when driving on normal roads. Do not use the cruise control on winding roads or in heavy traffic. Setting Cruise Control It is normal to have strong vibrations and noise from the brake system when HDC is applied.
220 Driving and operating Increasing setting speed • Turn the adjust wheel to RES/+ and hold it. Your vehicle will accelerate. Release the adjust wheel at the desired speed. • Turn the adjust wheel to RES/+ and release it immediately. The speed will increase by 1~2 km/h (0.6~1.2 mph). To temporarily accelerate If you want to speed up temporarily when the cruise control is on, depress the accelerator pedal. Increased speed will not interfere with cruise control operation or change the set speed.
Driving and operating 221 Speed limit system Setting Speed TEL076A The speed limit system is enables vehicle to set a maximum speed. The maximum speed has been set it gets stored and inform to the driver with indicator or warning chime. Increasing setting speed • Turn the adjust wheel to RES/+ and hold it. Your setting speed will increase. Release the adjust wheel at the desired speed. • Turn the adjust wheel to RES/+ and release it immediately. The setting speed will increase by 1~2 km/h (0.6~1.
222 Driving and operating Resume stored speed Turn the adjust wheel to RES/+. The previously setting speed will be set. To active, turn the adjust wheel toward SET/- and release it. Deactivation To cancel the speed limit system, press the button [. To deactivate the speed limit system, press the button s. Speed limit warning If you drive above the set speed, the warning indicator will flash and warning chime will sound.
Driving and operating 223 The system consists of four ultrasonic parking sensors in the rear bumper. Note The attached parts in the detection area cause system malfunction. Activation When reverse gear is engaged, the system is activated automatically. An obstacle is indicated by audio. The interval between the audios becomes shorter as the vehicle gets closer to the obstacle. When the distance is less than 40 cm, the audio sounds continue.
224 Driving and operating Caution Caution When receiving other ultrasonic signals (metal sound or air braking noises from heavy commercial vehicles), the parking assistance system may not work properly. The upper portion of the vehicle can be hit before the sensor operation, so check with outside rearview mirrors or by turning your head during parking. Clean dirty sensors with a soft sponge and clean water. The parking assistance system will be operated correctly on vertically flat surfaces.
Driving and operating 225 {Warning The Rear Vision Camera (RVC) system does not replace driver vision. RVC does not: Detect objects that are outside the camera's field of view, below the bumper, or underneath the vehicle. Detect children, pedestrians, bicyclists, or pets. Do not back the vehicle by only looking at the RVC screen, or use the screen during longer, higher speed backing maneuvers or where there could be cross-traffic.
226 Driving and operating When the system does not seem to work properly The RVC system might not work properly or display a clear image if: The RVC is turned off. It is dark. The sun or the beam of headlamps is shining directly into the camera lens. Ice, snow, mud, or anything else builds up on the camera lens.Clean the lens, rinse it with water, and wipe it with a soft cloth. The back of the vehicle is in an accident.
Driving and operating 227 Filling the tank Caution If you use inappropriate grade fuel or put incorrect fuel additives into the fuel tank, the engine and catalytic converter may be seriously be damaged. Be sure to use the correct fuel corresponding to your vehicle when refueling. If you fill diesel in your petrol powered vehicle, your vehicle can be seriously damaged. You can confirm the correct fuel by taking a look at information on the fuel filler cap.
228 Driving and operating Caution Wipe off any overflowing fuel immediately. GC3D8001A The fuel filler door is in the right rear side of vehicle. 1. Stop the engine. 2. Unlock the fuel filler door, press " button. 3. To open the fuel door, push the rearward center edge in and release , it will then open. 4. Turn the fuel filler cap counterclockwise slowly. If a hissing sound is heard, wait for it to stop before completely unscrewing the cap. GC3D8002A 5. Remove the cap.
Vehicle care Vehicle care General information General information .....................229 Accessories and modifications Vehicle checks ............................230 Bulb replacement ........................251 Electrical system .........................258 Vehicle tools ................................265 Wheels and tyres.........................265 Jump starting ...............................283 Towing .........................................285 Appearance care .........................
230 Vehicle care Open the hood, close all doors and lock the vehicle. Disconnect the clamp from the negative terminal of the vehicle battery. Beware that all systems are not functional, e.g. anti-theft alarm system. End-of-life vehicle recovery Information on end-of-life vehicle recovery centres and the recycling of end-of-life vehicles is available on our website. Only entrust this work to an authorised recycling centre. Vehicle checks Doing your own service Work Close the hood.
Vehicle care {Warning The ignition system uses extremely high voltage. Do not touch. 231 Hood Opening GC3D9001A GO3E10054A 1. Pull the release lever and return it to its original position. 2. Push safety catch lever to the right side and open the hood.
232 Vehicle care Closing Before closing the hood, press the support into the holder. Lower the hood and allow it to drop into the catch. Check that the hood is engaged. {Warning GO3E10003A GO3E10074A Caution When the engine is hot, only touch the tipped pad of latch lever. 3. Pull up the support rod lightly from the holder. And then secure it at the left side hook on the hood.
Vehicle care GO3E10002A Caution Do not pull down on the hood when the hood is supported by rod.
234 Vehicle care Engine compartment overview Petrol engine - 1.
Vehicle care 235 Petrol engine - 1.
236 Vehicle care Petrol engine - 1.
Vehicle care 237 Diesel engine - 1.
238 Vehicle care 1. Engine air filter 2. Dipstick for engine oil level 3. Engine oil cap 4. Brake fluid container 5. Battery 6. Fuse block 7. Washer fluid container 8. Engine coolant container 9. Auxiliary fuse block 10. Hydraulic power steering fluid container Engine oil It is advisable to check the engine oil level manually before embarking on a long journey. Check with the vehicle on a level surface. The engine must be at operating temperature and switched off for at least 5 minutes.
Vehicle care 239 {Warning Engine oil is an irritant and, if ingested, can cause illness or death. Keep out of reach of children. Avoid repeated or prolonged contact with skin. Wash exposed areas with soap and water or hand cleaner. TDL164A We recommend the use of the correct grade engine oil. The engine oil level must not exceed the MAX mark on the dipstick. GC3G10003A The engine oil filler cap is located on the camshaft cover. Caution Overfilled engine oil must be drained or suctioned out.
240 Vehicle care Engine Oil Life System This vehicle has a computer system that indicates when to change the engine oil and filter. This is based on engine revolutions, engine temperature and mileage. Based on driving conditions, the mileage at which an oil change is indicated can vary considerably. For the oil life system to work properly, the system must be reset every time the oil is changed. When the system has calculated that oil life has been diminished, it indicates that an oil change is necessary.
Vehicle care 1. Turn the ignition key to ON/START with the engine off. 241 If the vehicle message code 82(Change engine oil soon) comes back in the Driver Information Center (DIC) when the vehicle is started, the engine oil life system has not reset. Repeat the procedure. Caution Remember to reset the engine oil life system whenever the engine oil is changed. GC3N10004B TDL169A 2.
242 Vehicle care Automatic Transmission Fluid It is not necessary to check the automatic transmission fluid level. If you have a problem e.g. leak, have it remedied by a repairer. Note Use of the incorrect fluid may damage the vehicle. Always use the fluid listed in Recommended Fluids and Lubricants. See Recommended fluids and lubricants on page 303. Manual Transmission Fluid Engine air filter It is not necessary to check the manual transmission fluid level. If you have a problem e.g.
Vehicle care Caution Engine coolant The engine needs clean air to operate properly. In countries with moderate climate the coolant provides freeze protection down to approx. -30C. Do not operate your vehicle without the air cleaner element installed. In countries with extremely cold climate the coolant provides freeze protection down to approx. -40C. Driving without the air cleaner element properly installed can damage your engine. Maintain a sufficient concentration of anti-freeze.
244 Vehicle care {Warning Never remove the coolant reservoir cap when the engine and radiator are hot. It could cause serious injury. The engine must be cool before opening the cap. Carefully open the cap, relieving the pressure slowly. Fill up with a mixture of demineralised water and anti-freeze approved for the vehicle. Install the cap tightly. Have the anti-freeze concentration checked and have the cause of the coolant loss remedied by a repairer.
Vehicle care Caution Power steering fluid Electric Power Steering It is not needed to add coolant more frequently than the recommended interval. If the electronic power steering system is equipped, the power steering fluid is not used. If you are adding coolant often, this may be a sign that your engine needs maintenance. Hydraulic Power Steering 245 3. Unscrew the cap and pull it straight up. 4. Wipe the dipstick with a clean rag. 5. Replace the cap and completely tighten it. 6.
246 Vehicle care Caution If air temperature is likely to go below freezing, use windshield washer fluid which has sufficient anti-freezing property. Washer fluid Do not operate the vehicle without the required amount of power steering fluid. To do so can damage power steering system of your vehicle, leading to costly repairs. {Warning An overflow of the fluid may cause the fluid to burn or discolor paintwork. Do not overfill the reservoir.
Vehicle care Brake fluid 247 See "Brake Fluid" under Recommended fluids and lubricants on page 303. {Warning Brake fluid is poisonous and corrosive. Avoid contact with eyes, skin, fabrics and painted surfaces. Caution Make sure you thoroughly clean around the brake fluid reservoir cap before removing the cap. Contamination of the brake fluid system can affect system performance, leading to costly repairs.
248 Vehicle care Caution Do not dispose of used brake fluid with your household waste. Use your local, authorised waste management facility. Used brake fluid and their containers are hazardous. They can damage your health and the environment. Caution Brake fluid is harsh and can irritate skin and eyes. Do not allow the brake fluid to contact your skin or eyes. If it does, immediately wash the affected area thoroughly with soap and water, or hand cleaner. Battery The vehicle battery is maintenance free.
Vehicle care Replacing the battery Note Any deviation from the instructions given in this paragraph may lead to a temporary deactivation of the stop- start system. Only use batteries that allow the fuse box to be mounted above the battery. In vehicles with stop-start system, ensure to have the AGM (Absorptive Glass Mat) battery replaced with an AGM battery again. An AGM battery can be identified by the label on the battery. We recommend the use of an original GM battery.
250 Vehicle care Do not use solvents, gasoline, kerosene, or paint thinner to clean wipers. These are harsh and can damage the blades and painted surfaces. Front wiper blade Caution Before attempting to do the work, be sure you are fully acquainted with doing this job. We recommend that you consult your authorised repairer. GO3E10070A GO3E10069A 1. After wiper operation, turn ignition off when the wiper blades are in an upright position. 2. Pull the windshield wiper assembly away from the windshield.
Vehicle care 251 Bulb replacement Rear wiper blade Bulb replacement Switch off the ignition and switch off the relevant switch or close the doors. Only hold a new bulb at the base! Do not touch the bulb glass with bare hands. Use only the same bulb type for replacement. GO3E10061A GO3E10060A 1. Remove the wiper cover from the wiper assembly. 2. Lift wiper blade up to plane. 3. Press slider holder pin with fingers. 4. Pull wiper blade out.
252 Vehicle care This is similar to the condensation on your windows inside your vehicle during the rain and doesn't indicate a problem with your vehicle. Headlamps and parking lamps Low beam and high beam If the water leaks into the light bulb circuitry, have the vehicle checked, we recommend an authorised repairer. GC3E10003A 2. Disconnect the headlight bulb socket connector. GC3N10005A 1. Remove protective cover.
Vehicle care Vehicles when driving abroad When driving in countries where traffic drives on the opposite side of the road, adjust the headlamp to prevent dazzling of oncoming traffic. 253 Caution Have the adjustment of the headlights checked after deactivation. We recommend that you consult your authorised repairer. {Warning Improper adjustment of the headlamps can dazzle oncoming drivers. GC3E10004A 3. Remove the bulb from the bulb socket and replace the bulb. 4.
254 Vehicle care Front turn signal lamps Parking lmaps GC3N10009A GC3N10008A 1. Remove the socket from the assembly by turning counterclockwise. 2. Remove bulb socket from reflector. 3. Detach plug connector from bulb. 4. 5. 6. 7. 8. Remove bulb from socket. Insert new bulb. Plug connector onto bulb. Insert socket in reflector. Reinstall the assembly. Fog lamps Have bulbs replaced by a repairer. GC3N10010A 1. Rotate bulb holder counterclockwise and disengage.
Vehicle care 255 Taillamps, turn signal, stoplamps, and back-up lamps GC3N10011A 2. Push bulb into socket slightly, rotate counterclockwise, remove and renew bulb. 3. Insert bulb holder in reflector, rotate clockwise to engage. GC3N10013A GC3N10012A 1. Unscrew both screws. 2. Pull taillamp assembly for removal. Take care that the cable duct remains in position. 3. (1) Tail/Stop lamp (2) Side marker lamp (3) Tail lamp (4) Turn signal lamp (5) Back-up lamp.
256 Vehicle care Side turn signal lamps GC3N10014A 4. Remove bulb holder. Remove and renew bulb. 5. Insert bulb holder into the taillamp assembly. Install tail light assembly in body and tighten. Close covers and engage. 6. Switch on ignition, operate and check all lights. GC3D9004A GO3E10029A If the lamp is not operated, have it checked by repairer.
Vehicle care Center high-mounted stoplamp (CHMSL) License plate lamp 257 5. Insert bulb housing and secure using a screwdriver. Exterior Lamp Front Parking / DRL Lamp Front Turn Signal Lamp High-Beam Headlamp Low-Beam GC3D9011A GC3D9010A If the CHMSL is not operated, have the checked by repairer. 1. Prise the lamp out with a screwdriver. 2. Remove bulb housing downward, taking care not to pull on the cable. Rotate bulb holder counterclockwise to disengage. 3. Remove bulb from holder and renew bulb.
258 Vehicle care Interior lamps Electrical system Tailgate lamp Courtesy lamps Fuses 1. To remove it, prise the opposite side of the lamp switch using a flat-blade screwdriver. (Be careful not to make scratches.) 2. Remove the bulb. 3. Replace the bulb. 4. Reinstall the lamp assembly. Data on the replacement fuse must match the data on the defective fuse. Main fuses are located in a box attached on the battery positive terminal. For the needed case, in should be changed by a repairer. GO3E10032A 1.
Vehicle care When inspecting the fuse box, refer to the fuse box label. Fuse extractor Engine compartment fuse block 259 A fuse extractor is located in the fuse box in the engine compartment. Place the fuse extractor on the various types of fuse from the top or side, and withdraw fuse. GO3E10034A GO3E10033A The fuse boxs are in the engine compartment. Disengage the cover, lift it upwards and remove.
260 Vehicle care Main fuse block Mini Fuses 1. SUNROOF 2. OSRVM SW GO3E10010A 3. CANISTER VENT SOLENOID 4. NOT USED 5. EBCM VALVE 6. IBS 7. NOT USED 8. TCM B+ 9. BCM RVC 10. HDLP LEVELING LH/RH FSCM R/C 11. REAR WIPER 12. RR WDW DEFOG 13. NOT USED 14. OSRVM HEAT 15. FSCM B+ 16. HEATED SEAT MODULE 17. TCM R/C 18. ECM R/C 19. FUEL PUMP 20. NOT USED 21. Gasoline: FAN RLY (AUX BEC) Diesel: Fan3 Relay 85 22. COLD START PUMP 23. Gasoline: IGNITION COIL/INJECTOR COIL Diesel: ECM PT IGN-2 24. WASHER PUMP 25.
Vehicle care 35. A/C CLUTCH 36. FRONT FOG LAMP J-case Fuses 1. 2. 3. 4. 5. 6. EBCM PUMP FRT WIPER BLOWER IEC R/C NOT USED Gasoline: NOT USED Diesel: FUEL HEATER 7. NOT USED 8. COOL FAN LOW/MID 9. COOL FAN HIGH 10. Gasoline: EVP Diesel: GLOW PLUG 11. STARTER SOL U-Micro Relays 2. FUEL PUMP 4. SPARE HC-Micro Relays 7. STARTER Mini Relays 1. RUN CRANK 3. COOL FAN MID 5. PT RELAY 8. COOL FAN LOW 261 Auxiliary fuse block HC-Mini Relay 6. COOL FAN HIGH GO3E10014A Relays 01. ELECTRIC VACUUM PUMP RELAY 02.
262 Vehicle care Instrument panel fuse block Relays 01. ACCY/RAP RELAY 02. L/GATE RELAY 03. SPARE RELAY 04. BLOWER RELAY 05. LOGISTIC MODE RELAY Mini Fuses GO3E10035A Interior fuse block is located on the underside of the driver’s side instrument panel. To access the fuses, remove the storage. To remove the storage, open and pull it. GO3E10012A 1. BCM 1 2. BCM 2 3. BCM 3 4. BCM 4 5. BCM 5 6. BCM 6 7. BCM 7 8. BCM 8 9. DLIS 10. SDM B+ 11. DLC 12. HVAC MDL 13. L/GATE RLY 14. UPA MDL 15.
Vehicle care 16. SPARE 17. PWR WNDWSW DR 18. RAIN SNSR 19. BCM RVC 20. SWC BKLT 21. AC APO 22. CIGAR LTR/DC APO 23. SPARE 24. SPARE 25. SPARE 26. SDM RC/AOS DISPLY 27. IPC/CMPS MDL 28. HDLP SW/DC CVT/CLTCH SW 29. SPARE 30. SPARE 31. IPC B+ 32. RDO/CHIME/AUX JACK 33. DISPLY/FACE PLATE 34. ONSTAR UHP/DAB S/B Fuses 01. PTC 1 02. PTC 2 03. PWR WNDW MTR FRT 04. PWR WNDW MTR REAR 05. LOGISTIC MODE RLY 06. SPARE 07. PWR WNDW FRT 08. PWR WNDW REAR 263 Rear compartment fuse block Main Connector 1.
264 Vehicle care Relays 1. IGN RELAY 2. RUN RELAY Mini Fuses GO3E10013A 1. PWR LUM SW DR 2. PWR LUM SW PASS 3. AMPLIFIER 4. TRLR SOCKET 5. AWD MDL 6. AOS MDL 7. SPARE 8. TRLR PARK LP 9. SPARE 10. SPARE 11. TRLR MDL 12. NAV DOCK 13. HTD STR WHL 14. TRLR SOCKET 15. EVP SW 16. WATER IN FUEL SENSOR 17. ISRVM/RVC 18. SPARE S/B Fuses 01. PWR SEAT SW DR/ MEMORY MDL 02. PWR SEAT SW PASS 03. TRLR MDL 04. ACDCINV 05. BATT+ 06. HDLP WASH 07. SPARE 08. SPARE 09.
Vehicle care Vehicle tools Vehicles with spare wheel 265 Wheels and tyres Tools Wheels and tyres Vehicles with tyre repair kit Tyre condition, wheel condition Drive over edges slowly and at right angles if possible. Driving over sharp edges can cause tyre and wheel damage. Do not trap tyres on the kerb when parking. GO3E10037A The jack and the tools are in a storage compartment. See Tyre changing on page 277. GO3E10039A See Compact spare tyre on page 281.
266 Vehicle care Tyre designations Tyre pressure E.g. 215/60 R 16 95 H Check the pressure of cold tyres at least every 14 days and before any long journey. Do not forget the spare wheel. 215: Tyre width, mm 60: Cross-section ratio (tyre height to tyre width), % R: Belt type: Radial If the pressure is too low, this can result in considerable tyre warmup and internal damage, leading to tread separation and even to tyre blow-out at high speeds. 16: Wheel diameter, inches 95: Load index e.g.
Vehicle care 267 Tyre Pressure Monitor Operation Load 2: Eco (Eco tyre pressure mode) This vehicle may have a Tyre Pressure Monitor System (TPMS). Load 3: Hi (GVW tyre pressure mode) The TPMS is designed to warn the driver when a low tyre pressure condition exists. TPMS sensors are mounted onto each tyre and wheel assembly, excluding the spare tyre and wheel assembly.
268 Vehicle care The low tyre pressure telltale comes on at each ignition cycle until the tyres are inflated to the correct inflation pressure. The low tyre pressure telltale may come on in cool weather when the vehicle is first started, and then turn off as the vehicle is driven. This could be an early indicator that the air pressure is getting low and must be inflated to the proper pressure.
Vehicle care TPMS Malfunction Indicator GC3E10001A The TPMS will not function properly if one or more of the TPMS sensors are missing or inoperable. When the system detects a malfunction, the TPMS malfunction indicator flashes for about one minute and then stays on for the remainder of the ignition cycle. The TPMS malfunction indicator comes on at each ignition cycle until the problem is corrected.
270 Vehicle care TPMS Sensor Matching Process Each TPMS sensor has a unique identification code. The identification code needs to be matched to a new tyre/wheel position after rotating the tyres or replacing one or more of the TPMS sensors. The TPMS sensor matching process should also be performed after replacing a spare tyre with a road tyre containing the TPMS sensor. The malfunction light should go off at the next ignition cycle.
Vehicle care 7. Start with the driver side front tyre. 8. Place the relearn tool against the tyre sidewall, near the valve stem. Then press the button to activate the TPMS sensor. A horn chirp confirms that the sensor identification code has been matched to this tyre and wheel position. 9. Proceed to the passenger side front tyre, and repeat the procedure in Step 8. 10. Proceed to the passenger side rear tyre, and repeat the procedure in Step 8. 11.
272 Vehicle care Tyre rotation Tyres are rotated to achieve a more uniform wear for all tyres. The first rotation is the most important. Any time unusual wear is noticed, rotate the tyres as soon as possible and check the wheel alignment. Also check for damaged tyres or wheels. Do not include the spare tyre in the tyre rotation. Adjust the front and rear tyres to the recommended inflation pressure on the Tyre and Loading Information label after the tyres have been rotated.
Vehicle care Wheel covers Tyre repair kit Wheel covers and tyres that are factory approved for the respective vehicle and comply with all of the relevant wheel and tyre combination requirements must be used. Minor damage to the tyre tread or sidewall can be repaired with the tyre repair kit. {Warning Tyre damage exceeding 4 mm or that is at tyre's side wall near the rim cannot be repaired with the tyre repair kit.
274 Vehicle care TDL087A JE80A GO3E10040A 2. Remove the compressor and the sealeant bottle. 3. Remove the electrical connection cable (1) and air hose (2) from the stowage compartments on the underside of the compressor. 4. The switch on the compressor must be set to (. 5. Screw the compressor air hose to the connection on the sealant bottle. 6. Connect the compressor plug to the accessory socket(power outlet or cigarette lighter.) To avoid discharging the battery, we recommend running the engine. 7.
Vehicle care 275 Set the compressor near the tyre in such a way that the sealant bottle is upright. JE82A JE81A 8. Unscrew valve cap from defective tyre. 9. Screw the filler hose to the tyre valve. 10. Set the rocker switch on the compressor to I. The tyre is filled with sealant. 11. The compressor pressure gauge briefly indicates up to 6 bar whilst the sealant bottle is emptying (approx. 30 seconds). Then the pressure starts to drop. 12. All of the sealant is pumped into the tyre.
276 Vehicle care Reattach the tyre repair kit and continue the filling procedure for 10 minutes. If the prescribed tyre pressure is still not obtained, the tyre is too badly damaged. Seek the assistance of a repairer. Drain excess tyre pressure with the button over the pressure indicator. Do not run the compressor longer than 10 minutes. 14. Detach the tyre repair kit. Push catch on bracket to remove sealant bottle from bracket. Screw tyre inflation hose to free connection of sealant bottle.
Vehicle care The compressor and sealant can be used from approx. -30C~70C (-22~158F). Tyre changing Mixing tyres could cause you to lose control while driving. If you mix tyres of different sizes, brands, or types (radial and bias-belted tyres), the vehicle may not handle properly, and you could have a crash. Using tyres of different sizes, brands, or types may also cause damage to your vehicle. Be sure to use the correct size, brand, and type of tyres on all wheels.
278 Vehicle care {Warning We designed the jack for use on your vehicle only. Do not use jack provided with your vehicle on other vehicles. Never exceed the jack’s maximum permissible load. Use of this jack on other vehicles may damage the other vehicles or your jack and lead to personal injury. Removing the flat tyre and installing the spare tyre 1. Do a safety check before proceeding. 2. Turn the wheel wrench counterclockwise to loosen the wheel nut caps. If needed, finish loosening them by hand.
Vehicle care {Warning {Warning Getting under a vehicle when it is jacked up is dangerous. If the vehicle slips off the jack, you could be badly injured or killed. Lifting a vehicle and getting under it to do maintenance or repairs is dangerous without the appropriate safety equipment and training. If a jack is provided with the vehicle, it is designed only for changing a flat tyre. If it is used for anything else, you or others could be badly injured or killed if the vehicle slips off the jack.
280 Vehicle care {Warning VSD011A 6. Turn the jack handle clockwise to raise the vehicle far enough off the ground for the compact spare to fit under the vehicle. 1913316 7. Remove all of the wheel nuts. 8. Remove the flat tyre. Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come off and cause an accident. When changing a wheel, remove any rust or dirt from places where the wheel attaches to the vehicle.
Vehicle care 1913319 9. Remove any rust or dirt from the wheel bolts, mounting surfaces, and spare wheel. 10. Install the compact spare tyre. {Warning Never use oil or grease on bolts or nuts because the nuts might come loose. The vehicle’s wheel could fall off, causing a crash. 11. Put the wheel nuts back on with the rounded end of the nuts toward the wheel. Turn each nut clockwise by hand until the wheel is held against the hub. 12. Lower the vehicle by turning the jack handle counterclockwise.
282 Vehicle care The spare wheel is located in the tailgate (or boot lid) beneath the floor covering. It is secured in the recess with a wing nut. The spare wheel well is not designed for all permitted tyre sizes. If a wheel wider than the spare must be stowed in the spare wheel well after changing wheels, the floor cover can be placed on the projecting wheel. Temporary spare wheel Stowing of a damaged wheel Use of the temporary spare wheel could affect driveability.
Vehicle care 5. Mount the hook end to the opposite lashing eye. 6. Tighten the strap. 283 Jump starting Jump starting Do not start with quick charger. A vehicle with a discharged battery can be started using jump leads and the battery of another vehicle. {Warning GC3E10002A 1. Position the wheel on middle of the load compartment. 2. Stick the loop end of the strap through the according lashing eye. 3.
284 Vehicle care A discharged battery can already freeze at temperatures of 0 C. Defrost the frozen battery before connecting jump leads. Wear eye protection and protective clothing when handling a battery. The vehicles must not come into contact with each other during the jump starting process. Apply the parking brake, manual transmission in neutral , automatic transmission in P. Use a booster battery with the same voltage (12 volts).
Vehicle care 4. Switch on electrical consumers (e.g. headlights, heated rear window) of the vehicle receiving the jump start. 5. Reverse above sequence exactly when removing leads. 285 Towing Towing the vehicle If you need to have your vehicle towed, please use our service network or professional towing company. GO3E10047A GO3E10046A The best method is to have the vehicle transported using a recovery vehicle.
286 Vehicle care Towing the vehicle with all wheel drive system Please observe the following procedures when towing a vehicle: If towing by 2 wheels, lift the front driving wheels and tow with the front tyres locked. No passenger should remain in the vehicle being towed. Release the parking brake of the towed vehicle and place the transmission gear in neutral. Switch on the emergency warning lights. Keep the speed limits.
Vehicle care 287 Switch on ignition to release steering column lock and to permit operation of brake lights, horn and windshield wipers. Emergency towing If towing service is not available in an emergency, your vehicle may be temporarily towed by a rope secured to the emergency towing eye. Transmission in neutral. Caution Drive slowly. Do not drive jerkily. Excessive tractive force can damage the vehicle. GC3D9009A GC3D9008A Disengage cap by using the screwdriver and remove the cap.
288 Vehicle care Vehicle with automatic transmission: Do not tow the vehicle using tow eye. Towing with a tow rope could cause severe automatic transmission damage. When towing vehicle with automatic transmission, use flat bed or wheel lift equipment. Towing another vehicle Vehicle with manual transmission: The vehicle must be towed facing forward, not faster than 88km/h (55mph). In all other cases and when the transmission is defective, the front axle must be raised off the ground.
Vehicle care Caution Appearance care Drive slowly. Do not drive jerkily. Exterior care Excessive tractive force can damage the vehicle. Locks The locks are lubricated at the factory using a high quality lock cylinder grease. Use de-icing agent only when absolutely necessary, as this has a degreasing effect and impairs lock function. After using de-icing agent, have the locks regreased by a repairer. Washing The paintwork of your vehicle is exposed to environmental influences.
290 Vehicle care Do not use hard objects to remove spots of tar. Use tar removal spray on painted surfaces. Follow the car-washing guide Exterior lights Micro lens cracks and welding area cracks may be caused if the car-wash guide is not followed. Headlamp and other lamp covers are made of plastic. Do not use any abrasive or caustic agents, do not use an ice scraper, and do not clean them dry.
Vehicle care Rims are painted and can be treated with the same agents as the body. Paintwork damage Rectify minor paintwork damage with a touch-up pen before rust forms. Have more extensive damage or rust areas repaired by a repairer. Caution for accessory body kit assembled to the vehicle Take care for the accessory body kit assembled to the vehicle. • Take care not to cause breakage or body damage caused by a towing rope when the car is towed.
292 Vehicle care Permanent damage can result from using cleaners on surfaces for which they were not intended. Apply the cleaner directly to the cleaning cloth to prevent over-spray. Remove any accidental over-spray from other surfaces immediately. Note Using abrasive cleaners when cleaning glass surfaces on the vehicle could scratch the glass and/or cause damage to the rear window defogger. When cleaning the glass on the vehicle, use only a soft cloth and glass cleaner.
Vehicle care To clean: 1. Saturate a lint-free, clean white cloth with water or club soda. 2. Remove excess moisture. 3. Start on the outside edge of the soil and gently rub toward the center. Continue cleaning, using a clean area of the cloth each time it becomes soiled. 4. Continue to gently rub the soiled area. 5. If the soil is not completely removed, use a mild soap solution and repeat the cleaning process with plain water.
294 Vehicle care Instrument panel, vinyl, and other plastic surfaces To remove dust, a soft cloth dampened with water can be used. If a more thorough cleaning is necessary, a clean soft cloth dampened with a mild soap solution can be used to gently remove dust and dirt. Never use spot lifters or removers on plastic surfaces.
Vehicle care Floor mats {Warning If a floor mat is the wrong size or is not properly installed, it can interfere with the accelerator pedal and/or brake pedal. Interference with the pedals can cause unintended acceleration and/or increased stopping distance which can cause a crash and injury. Make sure the floor mat does not interfere with the accelerator or brake pedal. Use the following guidelines for proper floor mat usage: • The original equipment floor mats were designed for your vehicle.
Memo
Service and maintenance Service and maintenance General information .....................297 Scheduled maintenance ..............298 Recommended fluids, lubricants and parts ............................................303 General information Service information In order to ensure economical and safe vehicle operation and to maintain the value of your vehicle, it is of vital importance that all maintenance work is carried out at the proper intervals as specified.
298 Service and maintenance Scheduled maintenance Scheduled maintenance Maintenance Interval Every 1 year / 15,000km(10,000 miles) (whichever occurs first) Maintenance I -- Use Maintenance I for the first service or if Maintenance II was performed previously Maintenance II -- Use Maintenance II if the previous service performed was Maintenance I.
Service and maintenance No Service Maintenance I Maintenance II 8 Inspect wiper blades and the operation of exterior lighting. I I 9 Inspect drive belts. I I 10 Perform any required additional services - see applicable section. I I 11 Check for Field Actions. I I Maintenance 2 - perform all services described in Maintenance 1, plus the following 12 Replace Brake Fluid. R 13 Inspect engine cooling system. I 14 Inspect restraint system components.
300 Service and maintenance No Description Trax Normal conditions : every 150,000km(100,000 miles) / 10 Years 22 Replace automatic transmission oil 23 Replace Auxiliary Belt and Stretch Belt Every 90,000km/10years 24 Replace Timing Belt Every 150,000km/ 10years 25 Replace Timing Chain Every 240,000km / 10 years 26 Inspect Valve cleance for Gaoline and Diesel engine Every 150,000km / 10 years Severe conditions : every 75,000km(50,000 miles) / 5 Years Footnotes Maintenance Item 1 2 3 & 1
Service and maintenance 301 Maintenance Item Note 5 Visually inspect brake lines and hoses for, binding, leaks, cracks, chafing, etc. Inspect disc brake pads for wear and discs for surface condition. Inspect drum brake linings/shoes for wear or cracks. Inspect other brake parts, including drums, wheel cylinders, calipers, parking brake, etc. 7 Visually inspect front and rear suspension and steering system for damage, loose or missing parts or signs of wear.
302 Service and maintenance Maintenance Item Note 20 The diesel fuel filter cartridge may need to be replaced more frequently, based on biodiesel usage, driving in severe dust climate or off-road driving or towing a trailer for extended periods. General for auto transmission Change automatic transmission fluid and filter if the vehicle is mainly driven under one or more of these conditions: • In heavy city traffic where the outside temperature regularly reaches 90F (32C) or higher.
Service and maintenance Additional servicing Extreme operating conditions Extreme operating conditions are given when at least one of the following occurs frequently: Repeated short-distance driving less than 5 miles (10 Km). Extensive idling and/or slow-speed driving in stop-and-go traffic. Driving on dusty roads. Driving on hilly or mountainous terrain. Towing a trailer. Driving in heavy city traffic where the outside temperatures regularly reach 90F(32C) or higher.
304 Service and maintenance Engine Oil Selecting the right Engine Oil Engine Oil is identified by its Quality and its Viscosity Grade. "Quality" and "Specification" are equivalent terms in this respect. Engine Oil Quality is more important than Viscosity when selecting which Engine Oil to use. The Oil Quality ensures e.g. engine cleanliness, wear protection and oil aging control, whereas Viscosity Grade gives information on the oil’s thickness over a temperature range.
Service and maintenance Use of substitute engine oils if dexos is unavailable: In the event that dexos approved engine oil is not available at an oil change or for maintaining proper oil level, you may use substitute engine oil of the qualities mentioned above. Use of oils that do not meet the dexos specification, however, may result in reduced performance under certain circumstances.
306 Service and maintenance When selecting an Oil of the appropriate Viscosity Grade be sure to always select an Oil that meets the dexos™‚ Specification. Down to -25C: 5W-30, 5W-40. In countries with cold climate the coolant provides freeze protection down to approx. -50C. This concentration should be maintained all year-round. Down to -25C and below: 0W-30, 0W-40. Maintain a sufficient concentration of anti-freeze. The SAE viscosity grade gives information of the thickness of the oil.
Service and maintenance Power steering fluid Only use Dexron VI fluid. Manual transmission fluid Only use Castrol BOT 303 fluid. Automatic transmission fluid Only use Dexron VI fluid. Transfer case fluid (AWD) Only use synthetic hypoid 75W-90 fluid. Differential carrier assembly fluid (AWD) Only use synthetic hypoid 75W-90 fluid.
Memo
Technical data Technical data Vehicle identification Vehicle identification....................309 Vehicle identification number (VIN) 309 Identification plate Vehicle data.................................310 GO3E11002A The identification plate is on the left side door frame. GO3E11001A The vehicle identification number (VIN) is engraved the centre of the fire wall.
310 Technical data Vehicle data Engine data Sales designation 1.4 1.6 1.7 Diesel 1.
Technical data 311 Performance Engine Top speed [km/h] ([mph]) Manual transmission Automatic transmission 1.4 1.6 1.7 Diesel 1.7 Diesel 1.7 Diesel AWD FWD FWD 194 173 - - 1.8 1.8 FWD AWD FWD AWD 186 - 183 180 - - 183 - 180 180 Fuel consumption - CO2-emissions Engine ( MT/AT) 1.4 AWD 1.6 FWD 1.7 FWD 1.7 AWD 1.8 FWD urban [L/100 km] 7.8 / - 8.3 / - 5.4 / 6.4 5.6 / - / 10.5 extra-urban [L/100 km] 5.6 / - 5.6 / - 4.0 / 4.6 4.5 / - / 6.0 total [L/100 km] 6.
312 Technical data Vehicle weight Min. Curb weight, with driver (75kg) 1.4 1.6 Engine AWD FWD FWD Manual transmission 1454 1365 - - Automatic transmission 1.7 Diesel 1.7 Diesel 1.7 Diesel 1.8 1.8 FWD AWD FWD AWD 1458 - 1504 1394 - - 1470 - 1414 1486 1.8 1.8 FWD AWD Max. Curb weight, with driver (75kg) 1.4 1.6 Engine AWD FWD FWD Manual transmission 1556 1467 - - 1.4 1.6 Engine AWD FWD FWD Manual transmission 1876 1787 - - Automatic transmission 1.
Technical data Vehicle dimensions Length [mm] 4248 Width without exterior mirrors [mm] 1766 Width with two exterior mirrors [mm] 2035 Height (without antenna) [mm] w/o roof rack 1674 Length of luggage compartment floor [mm] 730(floor to rear seat backrest) Tailgate width [mm] 1001(Width between wheel housings) Tailgate height [mm] 721(height of load sill ) Wheelbase [mm] Turning circle diameter [m] 2555 10.
314 Technical data Capacities and Specifications Engine oil Engine 1.4 1.6 1.7 Diesel 1.8 including Filter [l] 4L 4.5L 5.4L 4.5L between MIN and MAX [l] 1L 1L 1L 1L 1.4 1.6 1.7 Diesel 1.
Technical data 315 Tyre pressures EU 27+2 GAS Front[kPa] ([psi]) 1~3Persons Type Rear[kPa] ([psi]) 4~5Persons 1~3Persons 4~5Persons COMPORT ECO GVW COMPORT ECO GVW 205/70R 16 200(29) 270(39) 270(39) 200(29) 280(41) 280(41) 215/55R 18 220(32) 270(39) 270(39) 220(32) 280(41) 280(41) Compact spare tyre 420(60) EU27+2 Diesel Front[kPa] ([psi]) 1~3Persons Type Rear[kPa] ([psi]) 4~5Persons 1~3Persons 4~5Persons COMPORT ECO GVW COMPORT ECO GVW 205/70R 16 220(32) 270(39) 2
316 Technical data Non-EU GAS Front[kPa] ([psi]) 1~3Persons Type Rear[kPa] ([psi]) 4~5Persons 1~3Persons 4~5Persons COMPORT ECO GVW COMPORT ECO GVW 205/70R 16 200(29) 200(29) 200(29) 200(29) 200(29) 200(29) 215/55R 18 220(32) 220(32) 220(32) 220(32) 220(32) 220(32) Compact spare tyre 420(60)
Customer information 317 Customer information Vehicle data recording and privacy ....................................................317 Vehicle Data Recording...............317 Vehicle data recording and privacy Vehicle Data Recording Vehicle Data Recording Vehicle data recording and privacy The vehicle has a number of computers that record information about the vehicle’s performance and how it is driven.
318 Customer information This data could provide an understanding of the circumstances in which crashes and injuries occur. Data could be recorded by the vehicle only if a non-trivial crash situation occurs; no data are recorded under normal driving conditions and no personal data are recorded. However, other parties, such as law enforcement, could combine recorded data with the type of personally identifying data routinely acquired during a crash investigation.
Index A Accessories and modifications .. 229 Adjustable air vents ................... 192 Air conditioning regular operation .................................................... 194 Air conditioning system ............. 189 Air intake ................................... 193 Airbag and safety belt tensioner light .................................................... 86 Airbag on-off light ........................ 86 Airbag on-off switch ..................... 50 Airbag system .............................
.................................................... 199 Automatic light control ............... 108 Automatic Transmission ............ 204 Automatic Transmission Fluid ... 242 Auxiliary Devices ....................... 153 B Battery ....................................... 248 Battery power protection ........... 114 Bluetooth ................................... 166 Brake assist .............................. 215 Brake fluid ................................. 247 Brake system warning light .........
Engine exhaust ..........................202 Engine oil ...................................238 Engine Oil Life System ..............240 Engine oil pressure light ..............91 Exterior care ..............................289 Exterior lamp controls ................107 Exterior Lighting .............................9 Fuel consumption - CO2-emissions .................................................. 311 Fuel for diesel engines .............. 226 Fuel for petrol engines .............. 226 Fuel gauge .......
Interior lamps ............................ 258 Interior lighting .......................... 112 Interruption of power supply ...... 209 Introduction ................................... 1 Isofix child restraint systems ....... 58 Manual transmission ................. 211 Manual Transmission Fluid ....... 242 Manual windows .......................... 29 Mirror Adjustment .......................... 5 N J New vehicle break-in ................. 197 Jump starting ............................ 283 O K Keys ..
Safety locks .................................23 Seat adjustment ......................3, 38 Seat position ................................37 Selector lever .............................205 Service .......................................194 Service display .............................82 Service information ....................297 Service schedules ......................298 Service vehicle soon light ............87 Side airbag system ......................47 Side turn signal lamps ...............
Vehicle personalization ............. 102 Vehicle Storage ......................... 229 Vehicle weight ........................... 312 W Warning buzzers ......................... 99 Washer and Wiper Systems ....... 11 Washer fluid .............................. 246 Wheel covers ............................ 273 Wheels and tires ....................... 265 Windshield wiper/washer ............ 72 Wiper blade replacement ..........
