Technical data

Instruments and controls 63
Control indicators in the centre
console
Turn signal
O flashes green.
Flashes
The control indicator flashes if a turn
signal or the hazard warning flashers
are activated.
Rapid flashing: failure of a turn signal
light or associated fuse.
Bulb replacement 3 155, Fuses
3 161, Turn signals 3 73.
Seat belt reminder
Seat belt reminder on front
seats
X for driver's seat illuminates or
flashes red.
k for front passenger seat illuminates
or flashes red, when seat is occupied.
1. After the ignition has been
switched ON, the control indicator
illuminates until the seat belt is
fastened.
2. After the engine is running, the
control indicator flashes for
100 seconds and then illuminates
until the seat belt is fastened.
3. If the vehicle moves more than
0.15 mile or the speed is over
14 mph with unfastened seat belt,
the control indicator will flash and
the chime will sound for
100 seconds.
After 100 seconds, the indicator will
illuminate until the seat belt is
fastened, and the chime will go off.
Seat belt status on rear seats
X for rear seats illuminates or flashes
red.
1. When engine is running with all
doors closed and the vehicle
speed is less than 6 mph, the rear
seat belt indicators illuminate until
the belts are fastened. In case that
nobody occupies on the seats,
this behaviour is still applied.
2. If the vehicle speed is over
6 mph with all doors closed,
unfastened rear seat belt
indicators will illuminate for
35 seconds and go off regardless
of occupancy of the rear seats. If
a rear seat belt becomes
fastened, the other unfastened
belt indicator will illuminate again
for 35 seconds and go off.
3. If any rear seat belt status
changes from fastened to
unfastened when the vehicle
speed is over 6 mph and all doors
closed, the belt indicator will flash
until the seat belt is fastened and
a chime will sound 4 times.
Three-point seat belt 3 33.