Technical data

60 Instruments and controls
Odometer
The odometer shows how far your car
has been driven in kilometres or
miles.
There are two independent
trip odometers, which measure the
distances your vehicle has travelled
since you last reset this function.
The odometer, trip A and trip B can be
switched by pressing the TRIP
button.
Note
To reset each trip odometre to zero,
press the TRIP button of the cluster
more than 2 seconds.
Tachometer
Displays the engine revolutions per
minute.
Drive in a low engine speed range for
each gear as much as possible.
Fuel gauge
Displays the fuel level in the tank.
Never run the tank dry.
Because of the fuel remaining in the
tank, the top-up quantity may be less
than the specified tank capacity.
Movement of the fuel within the fuel
tank causes the fuel gauge pointer to
move when you brake, accelerate or
turn.