Technical data

Storage 51
Note
To ensure enough room for rear seat
cushion operation, slide the front
seat forward and adjust the front
seat backrest upright.
3. Pull up the release knob on top of
the rear seat backrest and fold it
forward and down.
4. Adjust the front seats to the
desired position.
To return the backrest to the upright
position, lift it up and push it firmly into
place.
Make sure the seat belts are not
pinched by the latch.
To return the rear seat cushion, put
the rear part of the seat cushion in its
original position ensuring that the
seat belt buckle straps are not twisted
or caught under the seat cushion,
then push the front part of the seat
cushion firmly down until it latches.
Caution
When returning rear seat backrest
to the upright position, place the
rear seat belt and buckles
between the rear seat backrest
and one cushion. Make sure the
rear seat belt and buckles do not
get pinched under the rear seat
cushion.
Make sure the seat belts are not
twisted or caught in the seat
backrest and are arranged in their
proper position.
9 Warning
Ensure that the rear seat
backrests are all the way back and
locked in position before operating
the vehicle with passengers on the
rear seat.
Do not pull the release knobs on
the top of the seat backrest while
the vehicle is moving.
It can cause injuries or damage to
the occupants.