Technical data

160 Vehicle care
Number plate light
1. Unscrew both screws.
2. Remove bulb housing downward,
taking care not to pull on the
cable.
Rotate bulb holder anti-clockwise
to disengage.
3. Remove bulb from holder and
renew bulb.
4. Insert bulb holder in bulb housing
and rotate clockwise.
5. Insert bulb housing and secure
using a screwdriver.
Interior lights
Courtesy lights
1. To remove it, prise the opposite
side of the light switch using a flat-
blade screwdriver. (Be careful not
to make scratches.)
2. Remove the bulb.
3. Replace the bulb.
4. Reinstall the light assembly.
Load compartment light
1. Prise the lamp out with a
screwdriver.
2. Remove bulb.
3. Insert new bulb.
4. Install lamp.