Technical data

156 Vehicle care
Headlights
Low beam and high beam
1. Detach plug connector from bulb.
2. Remove protective cover.
3. Press spring clip, disengage it.
4. Remove bulb from reflector
housing.
5. When fitting a new bulb, engage
the lugs in the recesses on the
reflector.
6. Engage the spring clip.
7. Place headlight protective cover
in position and close.
8. Plug connector onto bulb.
Headlight aiming
The low-beam headlight aiming can
be adjusted with the screw located
above the headlight.
Caution
If the headlights need to be re-
aimed, it is recommended that the
vehicle is taken to your authorised
workshop for service, because it is
related with safety.
Parking lights
1. Detach plug connector from bulb.