Specifications

A. Wheel Blocks
B. Knob
C. Wing Nut
D. Retaining Hook
E. Jack
F. Jack Head
G. Mounting Bracket
2. Release the jack (E) from the mounting bracket (G)
by turning the knob (B) on the jack counterclockwise
to lower the jack head (F) from the mounting
bracket.
3. Remove the wheel blocks (A) attached to the jack
(E) by turning the wing nut (C) counterclockwise.
Place the wheel blocks where needed as indicated
in the previous Caution.
The tools for changing a flat tire are located in the
passenger’s side Top-Box storage unit.
To remove the tools, do the following:
1. Open the top door on the passenger’s side Top-Box
Storage unit. Use the ignition/door key to unlock it if
it is locked. See Top-Box Storage on page 2-80
for more information on the Top-Box Storage unit.
5-86