Specifications

Table Of Contents
Securing a Child Restraint Designed
for the
LATCH
System
1. Find the anchors for the seating position you want
to
use, where the bottom of the seatback meets the
back
of
the seat cushion.
2. Put the child restraint on the seat.
3. Attach the anchor points on the child restraint to the
anchors in the vehicle. The child restraint
instructions will show you how.
4.
If the child restraint is forward-facing, attach the top
strap
to
the top strap anchor. See Top Strap
on
page
1-48.
Tighten the top strap according
to
the child restraint instructions.
5. Push and pull the child restraint in different
directions
to
be sure it is secure.
To remove the child restraint, simply unhook the top
strap from the top tether anchor and then disconnect the
anchor points.
Securing a Child Restraint
in
a Rear
Outside Seat Position
If
your child restraint is equipped with the
LATCH
system, See Lower Anchorages and Top Tethers for
Children (LATCH System) on page
1-51.
1-53