Specifications

Table Of Contents
60,000
Miles
(100
000
km)
0
0
u
0
0
Check rearlfront axle fluid level and add fluid as
needed. Check constant velocity joints and axle seals
for leaking.
Clean and repack the front wheel bearings (or at
each brake relining, whichever occurs first).
Rotate tires. See Tire Inspection and Rotation
on
page
5-62
for proper rotation pattern and additional
information. (See footnote
+.)
Replace fuel filter. An Emission Control Service. (See
footnote
f.)
Vehicles With GVWR Above
10,000
Ibs. Only:
Inspect shields for damage or looseness. Adjust or
replace as required. This is
a Noise Emission Control
Service. Applicable only to vehicles sold in the
United States.
Inspect Evaporative Control System. Check all fuel
and vapor lines and hoses for proper hook-up,
routing and condition. Check that the purge valve
works properly,
if
equipped. Replace as needed. An
Emission Control Service. (See footnote
t.)
67,500
Miles
(1
12
500
km)
0
Check readfront axle fluid level and add fluid as
needed. Check constant velocity joints and axle seals
for leaking.
page
5-62
for proper rotation pattern and additional
information. (See footnote
+.)
0
Rotate tires. See Tire Inspection
and
Rotation
on
75,000
Miles
(125
000
km)
0
D
Check readfront axle fluid level and add fluid
as
needed. Check constant velocity joints and axle seals
for leaking.
Vehicles With GVWR Above
10,000
Ibs.
Only:
Inspect shields for damage or looseness. Adjust or
replace
as
required. This is a Noise Emission Control
Service. Applicable only to vehicles sold in the
United States,
Rotate tires. See Tire Inspection and Rotation on
page
5-62
for proper rotation pattern and additional
information. (See footnote
+,)
82,500
Miles
(137
500
km)
0
Check readfront axle fluid level and add fluid as
needed. Check constant velocity joints and axle seals
for leaking.
page
5-62
for proper rotation pattern and additional
information. (See footnote
+.)
CI
Rotate tires. See Tire Inspection and Rotation on
90,000
Miles
(150
000
km)
0
Check readfront axle fluid level and add fluid
as
needed. Check constant velocity joints and axle seals
for leaking.
each brake relining, whichever occurs first.)
0
Clean and repack the front wheel bearings (or at
6-8