Specifications

Table Of Contents
4.
Push the pin with the white handle marked
“R”
down until it is in the retaining clip.
5.
Push the pin with the black handle marked
“L”
down until it is in the retaining clip.
6.
If the vehicle has a floor mat, put the flap back
to
its original position.
7.
Repeat this procedure for the other seat base.
8.
Connect the quick-release latch plates for the
lap-shoulder belts by inserting the latch plates
into the buckles attached
at
the outboard positions
of the bench seat.
Do
not twist the belt.
9.
Check that both locking pins are locked into place
before operating the vehicle.
1
-8