Specifications

Instruments and Controls
- 64 -
Brake system warning lamp
Brake system warning light will be on
if you pull hand brake with the ignition
on; the light will be off if you release
hand brake.
Release hand brake to the full before
driving. If the warning light is still on
after you fully release hand brake, it
indicates that brake fluid is in badly
need to be added. At that time, you
should:
· Stop the car immediately.
· Check brake fluid level. If necessary,
add Chery recommended brake fluid,
and let the level between ―MAX‖ and
―MIN‖ lines.
·If you are sure that the brake works
normally and braking system is safe
enough, have your vehicle checked by
the nearest Chery Authorized Service
Station.
·If you find that brake fluid leaks and
warning light is always on, or the
brake can not work normally, please
contact Chery Authorized Service
Station for assistance in time.
！Notice
Turn ignition on and pull hand brake.
If the brake system warning light is not
on, it indicates something is wrong
with the system. You should check the
electric bulb to see if it is of
malfunction. If the bulb is normal, you
should check the brake system. It
indicates brake fluid level is low if the
brake fluid warning light is always on,
which will influence braking
performance. You should decelerate
gradually and stop the car to check the
vehicle as follows:
1. Check the brake fluid tank. If the
level is too low, add the appointed
brake fluid.
2. Check the brake to see whether or