Specifications

Starting up and Operating
- 40 -
Position 1-Turn off the ignition switch
and the steering wheel is locked.
In order to lock the steering wheel,
please turn the steering wheel pull out
the key, until you hear a click. The
radio and horn no longer work in this
position.
！Notice
Do not pull out the key before parking
the vehicle properly, in order to avoid
locking the steering wheel
accidentally.
Position 2-Complete the ignition
electric circuit.
If it is hard or impossible for you to
turn the key to this position, you can
turn the steering wheel slightly, in
order to relax the locking mechanism
of steering wheel.
Position 3- Start the engine
When the lock hole is in this position,
front headlight and electric appliance
with heavy power consumption are all
cut off.
Anti-repeat starting device is installed
in the ignition switch. This device will
prevent the starter from misstarting,
once the starter is running, so as to
avoid flywheel of engine and starter
being damaged. If you fail to start the
engine, please let the ignition key
return to position 1 before restarting,
then turn the ignition key to position 2.
Before starting the engine
1. Make sure that all occupants fasten
seat belts properly.
2. Turn off unnecessary lights and
accessories.
3. Make sure pulling hand brake up.