Specifications

The Need-to-Know before Driving
- 18 -
Adjustment of seat belt altitude:
You can slide the adjustable anchor up
and down, to adjust the seat belt
altitude.
！Notice
For your safety, do not place the seat
belt too high or too low, it will tie your
neck if the seat belt is too high, it will
move under your shoulder if it is too
low, for your safety, please adjust the
seat belt to suitable position.
Lapping the seat belt
Install the seat belt in the middle of
rear row seat. Insert the tab into the
buckle. You will hear a click when the
tab locks in the buckle.
If the belt is not long enough for you,
move the tab to the suitable position,
fasten your belt.
If the belt is not short enough for you,
move the tab to the suitable position,
fasten your belt.
Press the lap buckle-release button and
allow the belt to retract, if you want to
release the seat belt. The tab and
buckle of rear seat belt is marked with
CENTRE. Please check the mark
before you wear the seat belt.
！Notice
Failure to use seat belt correctly could
increase the chance of severe injury.
The belt should be kept away from
your belly, keep the lap belt as low on
your hip bone as possible. It maybe
results in severe injury if the seat belt
is damaged or too tight. Do not work
hard to insert unsuitable tab into the
buckle. Insert the tab into the buckle
properly, in order to provide maximum
protection of the seat belt system,
please put seat belt to the original
position after disassembling the rear
seat.
Power window switch
With the ignition in ―2‖ position, you
can operate the power windows